My Cart

Submersible Fountain Pump

  • Manufacturer:
  • Series (3 Models):
  • Product Name:
    Submersible Fountain Pump
  • Model Number:
    RP0405T22A
5HP
Model Number
RP0405T22A
$2,944.00
RP0405T22A submersible fountain pump munro

Submersible Fountain Pump 5HP.

This amphibious 4" pump designed for continuous duty water features does not need a vault. The pump can be positioned at the bank instead of the bottom of a water source because a hose and strainer allows remote intake of fluid. RP amphibious pumps can also be piped to pump to double the pressure!

Designed for continuous or intermittent duty, the Munro RP Amphibious Series pumps (2-5HP) offer an excellent value and high-quality standards. This space-saving, yet heavy-duty pump is low-water friendly and long lasting. True continuous duty design – These pumps are made to run! Our design takes the flow path across the motor housing to whisk away the heat generated by the motor. A cool motor means a longer life.

  • Abrasion-resistant mechanical shaft seal – protects the motor for longer life
  • Enclosed channel impeller – increases efficiency and lowers operating cost
  • Stainless steel outer case – durable and low maintenance

COMMON APPLICATIONS Recommended for: water features, dewatering, utility, flood irrigation. 

ADVANTAGES

Easy to place and maintain – The amphibious design means you can retire your waders! Place this pump right on the bank of the water, where it’s easy to maintain. Laying down or standing up, you’ll see the same great performance.
            
Higher than average flow to hp with pump-to-pump pressure boost capability – High gallon output sets this pump apart from the crowd. If you need an extra boost, plumb pump-to-pump and double your output pressure.

Low cost to own – When pumps are in continuous use, the energy use and cost can really add up! Our pumps use lower amps per gallon pumped than most of our competitors, which saves power and money. 

More Information
Model Number RP0405T22A
Series Pond - Plastic
Max Flow (GPM.) 360
Max Flow GPH 21600
TDH Maximum (Ft) 80
TDH Maximum (PSI) 34
Horse Power (HP) 5
Horsepower (IE .5, 1, 1.5, 20) 5
Outlet Connection Type MNPT
Outlet (In.) 4
Wetted Materials 304SS, Steel
Elastomers / O-ring Buna-Nitrile
Voltage (V) 230/460
Voltage (Range) 208-230/460//190-220/380-415
Phase (Ø) Three (3)
Motor Frequency 60
Motor Amps (A) 13/7
Motor Hermetically Sealed
Speed (RPM.) 1725
Max Particle Size (In) 0.43
Viscosity Milk 3.20 cp 40.00 ssu
Length (In.) 18
Mechanical Seal Oil filled
Mechanical Seal Face SiC
Mechanical Seal Type Double
Other Diameter: 9-3/8"
Impeller Material Chrome Steel
Cord Length (Ft.) 24
Duty Continuous
Weight (Lbs) 103.000000
Warranty (YRS.) 1
GPM Of Water At 15 Feet Of Head 38
GPM Of Water At 25 Feet Of Head 22
>