MY CART 0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
American Stainless C25032B3AIR SS pump  AIR motor SS pump & AIR motor SS pump & AIR motor SS pump & AIR motor SS pump & AIR motor
American Stainless C25032B3AIR SS pump  AIR motor

Scroll Down For Product Details

Manufacturer: American Stainless
Series (122 Models):

SSPC Centrifugal Pumps Stainless Steel

Product Name:

SS pump & AIR motor

Model Number:

C25032B3AIR

Details

SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace.

Pump is close coupled to a GAST brand 6AM air motor. Due to the max. RPM of the air motor of 3000 RPM, the flow and pressure will be slightly less than that show in the performance curve. Upto 100CFM @ 80psi required. Kalrez elastomers.

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 -- NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter's Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Additional Information

Model Number C25032B3AIR
Series SSPC Centrifugal Pumps Stainless Steel
Max Flow (GPM.) 170
Max Flow GPH 10200
Minimum Flow (GPM.) 2
TDH Maximum (Ft) 85
TDH Maximum (PSI) 37
Horsepower 4
Inlet Connection Type FNPT
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 1.5
Wetted Materials 304SS
Motor Air-Pneumatic
Speed (RPM.) 3450
Motor Frame 56C
Self Priming No
Max Operating Temperature (F) 220
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 304SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Size (IN.) 5
Applications Chemical, Coolant, Cooling, Flooded Suction, Machine Tool, Parts Washer, Plating, Solvent
Drain Yes
Port Rotation Yes
Weight (Lbs) 51
Time to Ship (DAYS) 7-10 days

Supporting Docs

SS pump & AIR motorSS pump & AIR motor Size: (21.86 KB) Extension: jpg
SS pump & AIR motorSS pump & AIR motor Size: (53.64 KB) Extension: jpg
SS pump & AIR motorSS pump & AIR motor Size: (98.37 KB) Extension: jpg
SS pump & motorSS pump & motor Size: (88.74 KB) Extension: jpg
California prop 65