Wakeboard Towboat Ballast Puppy Pump
-
Model Number:
18220-1127
-
Product Name:Wakeboard Towboat Ballast Puppy Pump
-
Manufacturer:
-
Series (5 Models):
12v
Model Number
18220-1127
$414.00
Jabsco 18220-1127
The Wakeboard Towboat Ballast Puppy is designed to pump water into
Wakeboard Liquid Ballast Tanks Mastercraft and when reversed will
also pump water out of them. It has a flow rate of 9 GPM, so it can
fill most ballast tanks in about 5 minutes. It is equipped with a
Run-Dry Protection Device to automatically shut-off the pump and
protect the impeller from run-dry damage should pump be mistakenly
left on after the Ballast Tank is empty. Reversible to both fill
and empty ballast tanks. Used by Master Craft.
- Includes: LED Reversing Rocker Switch
- Motor: Permanent Magnet Type, Ball Type Shaft Bearing, and Reversible
- Nitrile Impeller- yellow
- Dimensions: 3-5/8" (high) x 7-1/8" (long) x 4-3/4" (wide)
- Motors meet USCG Electrical Regulation 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels
The Jabsco Water Puppy pump is the standard in compact, low voltage DC, self-priming, motor driven pumps. Since the Water Puppy is self-priming, it can be located above the fluid source and installed in a convenient location, mounted in any position. Able to lift water up to 4 feet, the flexible impeller can pass small solids without damaging the pump, and it delivers up to 9 GPM at open flow. It is equipped with a improved high torque motor and a new pressure cast bronze body featuring a reusable O-ring type end cover seal. Ideal for bilge pumping, bait tank circulation, livewell aeration, and washdowns.
This is the pump you've been searching for! This is like the pump used in most factory wakeboard ski boat ballast systems. This pump is a 12volt, reversible, high volume, ballast system necessity. Stop tossing pumps over the side of the boat, and enjoy a clean custom ballast system. 15 amp fuse. Ports are dual size, threaded internally and a external 1" hose barb.Replacement switch Part # 18753-0095 =$59.00
| Model Number | 18220-1127 |
|---|---|
| Series | Ballast DC Reversible Pumps |
| Max Flow (GPM.) | 9 |
| Max Flow GPH | 540 |
| TDH Maximum (Ft) | 20 |
| TDH Maximum (PSI) | 9 |
| Inlet Connection Type | FNPT |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | Bronze |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 12DC |
| Voltage (Range) | 12/24/36 VDC |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 6 |
| Max Operating Temperature (F) | 100 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Length (In.) | 7.130000 |
| Mechanical Seal | LIP TYPE |
| Mechanical Seal Type | Double |
| Other | Jabsco Ballast wakeboard boat pump Port: 1/2" NPT and 1" external hose barb size. Replacement switch Part # 18753-0095 =$59.00 |
| Impeller Material | Rubber |
| Duty | Intermitant |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United Kingdom |
| Weight (Lbs) | 10.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
