My Cart

High Pressure Trash Pump MIG30-13H

High pressure trash pump Honda engine Electric Start
Model Number
MIG 90281113
$5,958.00

Call For Price

Monarch MIG 90281113 High Pressure Trash Pump MIG30-13H

Hydro Seeding pump, used by Kincaid hydro seeder, Turf Master and Turbo Turf. MIG30 Used for mulchers and hydroseeder, horizontal directional drilling HDD machines by Vermeer MX125 MX240 drilling fluid system, and others. High pressure trash pump used for suction dredge.

Heavy duty semi trash pump of all iron construction. High pressure self priming pump for irrigation, marine, fire, pile driving, industrial and de-watering. Engine has Electric Start, Low oil shut off, gas engine. FMIG-13H 607714 and for frame mounted version see FMIT-30

IMPELLER- Semi open Cast iron, non clogging, designed for water but can also handle small quantities of mud, sand, or silt up to 10% by volume

PRIMING PLUG- Enables priming, without having to disconnect the discharge piping

CHECK VALVE- Built in with threaded NPT Suction inlet, prevents Siphoning, facilitates priming.

SEAL- Viton and stainless steel with SiC ceramic faces , mechanical self lubricated, no maintenance required

CASING- Cast gray iron rugged construction large capacity for faster priming. Self Cleaning interior design prevents silt build up.

WEAR PLATE- Replaceable steel wear plate, for maximum pump efficiency

  • ENGINE TYPE- Honda GX390
  • Fuel Tank- 6.9 qt
  • Starter- Electric
  • Low Oil Shut Off- Yes
  • Size 3" X 3"
  • Works with a variety of Vermeer drills, including D6x6, D7x11 Series II, D10x14, D16x20 Series II and D20x22 Series II, D24x40 Series II and D36x50 Series II.

The MIG series has been widely used in the hydro seeding industry because of its ability to pump volume of solids at high pressure. Use on brush fire rigs in place of PTO type fire pumps. Hard, siliconized graphite seal faces stand up to abrasive material found in construction and drainage applications. 4hgg2

More Information
Model Number MIG 90281113
Series High PressureTrash Pump MIG Hydroseeder,
Max Flow (GPM.) 340
Max Flow GPH 20400
TDH Maximum (Ft) 160
TDH Maximum (PSI) 69
Horse Power (HP) 13
Horsepower (IE .5, 1, 1.5, 20) 13.0000
Inlet Connection Type FNPT
inlet size 3"
Inlet (In.) 3
Outlet Connection Type FNPT
Outlet (In.) 3
Wetted Materials Cast Iron, Steel
Elastomers / O-ring Viton
Motor Gas Engine
Speed (RPM.) 3450
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 140
Max Particle Size (In) .62
Viscosity Milk 3.20 cp 40.00 ssu
Mechanical Seal Face SiC
Mechanical Seal Type Single
Other GPM of Water @ 10 Ft. of Head 370 GPM of Water @ 30 Ft. of Head 330 GPM of Water @ 40 Ft. of Head 312 GPM of Water @ 50 Ft. of Head 290 GPM of Water @ 60 Ft. of Head 270 GPM of Water @ 70 Ft. of Head 250 GPM of Water @ 80 Ft. of Head 230 GPM of Water @ 90 Ft. of Head 208 GPM of Water @ 100 Ft. of Head 185 GPM of Water @ 125 Ft. of Head 122 GPM of Water @ 150 Ft. of Head 43
Rotation clockwise viewed from engine side
Low Oil Shutdown Yes
Impeller Material Cast Iron, semi-open solids handling
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 270.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 1.5 MB) Extension: pdf