Vertical CI Centrifugal Pump & Mtr
Series (19 Models):
Product Name:Vertical CI Centrifugal Pump & Mtr
Model Number:TNW520HF 3
TN Series pumps are designed to cover a wide range of pumping applications. They can handle thin and heavy liquids containing abrasives and bits of solids, while maintaining consistent and dependable flow. Except for the 24” and 36” models, pumps are designed so that there are no bearings or seals in the liquid, making them virtually maintenance-free. All TN series pumps are available with nickel plating, baked epoxy, Teflon or nylon coatings, and stainless steel shafts for extra corrosion and abrasion resistance.
The TN 50 Series generates approximately 30% more volume than TN 40 Series pumps. Discharge diameter and maximum viscosity for each pump are listed.
TN 50 Specifications: 3HP, 1725 RPM, 1-1/4” NPT vertical discharge. Maximum viscosity: 500 SSU.
TN 50H: 3HP, 3450 RPM, 1-1/2” NPT vertical discharge. Maximum viscosity: 500 SSU.
TN 50HH: The TN 50HH has the same specifications as the TN 50H, but with a larger diameter impeller to produce higher pressure.
Note: Information about the flow curves: 1. TN50HH water2. TN50HH 300 SSU oil3. TN50H Water4. TN50H 300 SSU oil5. TN50 ¾ HP water6. TN50 ¾ HP 300 SSU oil
|Model Number||TNW520HF 3|
|Series||TN50 Vertical CI Coolant Pump & Mtr.|
|Max Flow (GPM.)||75|
|Max Flow GPH||4500|
|Minimum Flow (GPM.)||1.0000|
|TDH Maximum (Ft)||90|
|TDH Maximum (PSI)||39|
|TDH BEP (FT.)||80.0000|
|Horse Power (HP)||3|
|Horsepower (IE .5, 1, 1.5, 20)||3.0000|
|Outlet Connection Type||FNPT|
|Wetted Materials||304SS, Acetal-Delrin, Cast Iron|
|Phase (Ø)||Three (3)|
|Max Operating Temperature (F)||180|
|Viscosity||SAE 10 oil 88.00 cp 500.00 ssu|
|Mechanical Seal Type||Double|
|Other||suitable replacement for OEM pumps like Gusher Ruthman|