My Cart

FTI DB5.5P Magnetic pump Polypro

1/4 Hp 115V, TEFC
Model Number
DB5.5P-M233
$829.19
DB5.5p-m613 Finish thompson pump
Magnetic coupled pump.
  • Five-year warranty
  • Extended run dry ability (with carbon bushing)
  • High operating efficiency —Up to 70%
  • Polypropylene construction
  • Powerful neodymium magnets
  • Close-coupled design
  • Horizontal or vertical installation with IEC motor with base
  • Back pullout design
  • Mounts to NEMA and IEC motor frames
  • Replaceable shaft
  • ISO 1940 G2.5 balancing
  • CE certified/ATEX available
  • Working pressure up to 90 psi (6.2 bar) or 50 psi (3.5 bar) with Gylon® gasket
  • Specific gravity over 1.8
  • Viscosity up to 150 cP
  • Polypropylene—180o F (82o C)

Used for: Chemical processing, Plating, Water and wastewater, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger

More Information
Model Number DB5.5P-M233
Series DB Magnetic Chemical Pump FTI
Max Flow (GPM.) 138
Max Flow GPH 8280
TDH Maximum (Ft) 31
Horse Power (HP) 1/4
Horsepower (IE .5, 1, 1.5, 20) .25
Inlet Connection Type FNPT
Inlet (In.) 1
Outlet Connection Type MNPT
Outlet (In.) 0.75
Wetted Materials PolyPro-GF
Elastomers / O-ring Viton
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 56C
Self Priming No
Max Operating Temperature (F) 180
Max Particle Size (In) 0.0600
Viscosity Milk 3.20 cp 40.00 ssu
Shaft Ceramic
Mechanical Seal No
Motor Bearings Ball
Impeller Size (IN.) 3 inch
Pump Bearing Carbon/graphite
Impeller Material PolyPro, closed
Cord Length (Ft.) 0
Duty Continuous
Drain No
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 30.000000
Warranty (YRS.) 5
GPM Of Water At 25 Feet Of Head 16
>
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.