My Cart

Electric Trash Sewage pump 3HP

208/230/460v 3P 6 600 GPH
Model Number
316A-95
$1,554.00
AMT 316A-95 Electric Trash  Sewage pump 3HP

AMT 316A-95

3HP Electric motor Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Cast iron construction with 2 vane Stainless steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance and Buna N O-rings and check valves. No front cleanout. Built-in check valves allows trash pumps to reprime automatically in an open system, without need of a foot valve. 2" trash pumps do not have front cleanout.

The solids handling capabilities of the trash pumps make them ideally suited for a variety of industrial applications including: sewage treatment, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water, irrigation and other applications. Direct replacement for 4XX78 02s3vz. See Curve "A"

These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.

316A-IPT-95

Series: Electric Trash Pumps
More Information
Model Number 316A-95
part number 316A-999-95
Series Trash Pump Electric Sewage Self-Priming Pumps
Max Flow (GPM.) 105
Max Flow GPH 6300
TDH Maximum (Ft) 60
TDH Maximum (PSI) 26
Horse Power (HP) 3
Horsepower (IE .5, 1, 1.5, 20) 3.0000
Inlet Connection Type FNPT
inlet size 2"
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 316SS, Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 208-230/460
Voltage (Range) 208-240/460
Phase (Ø) Three (3)
Motor Frequency 60/50
Motor Amps (A) 8/4
Motor TEFC
Speed (RPM.) 3450
Motor Frame 56J thrd
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 180
Max Particle Size (In) 1
Viscosity Cream 16.50 cp 100.00 ssu
Shaft 416SS
Length (In.) 21.000000
Mechanical Seal Face SiC
Mechanical Seal Type Single
Motor Bearings Ball
Impeller Number (In.) A
Other [pic of imported dayton pump] Operation in gray area(of curve) may result in damage to pump components and void warranty due to cavitation
Impeller Material Stainless, non-clog semi-open
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 90.000000
Quick Ship Yes
UPC 072684650617
Warranty (YRS.) 1
GPM Of Water At 20 Feet Of Head 110
GPM Of Water At 30 Feet Of Head 85
GPM Of Water At 40 Feet Of Head 60
GPM Of Water At 50 Feet Of Head 30

Supporting Docs

Supporting Docs
pdf
(Size: 1.85 MB) Extension: pdf
pdf
(Size: 1.86 MB) Extension: pdf

AMT Pump Company is A Subsidiary of The Gorman-Rupp Company located in Mansfield, Ohio. AMT offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products. AMT manufactures and sells Industrial / Commercial pumps & accessories through authorized distributors.

Virtually every product AMT sells is engineered and designed by the company. Pump components are machined, assembled and tested at the Royersford, Pennsylvania facility.

AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps.