Search results for: 'dual float level switch ultimate'

Mechanically-activated switch designed for direct control of pumps up to 1/2 HP at 120 VAC. 15VM1WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications with ...

Mechanically-activated switch designed for direct control of pumps up to 1 HP at 240 VAC/1. 20VM2WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications...

HydroCheck HC8000 Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually ...

SJE Vertical Master Pump Level Switch 115v.

Mechanically-activated switch designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 115 VAC. 20VM1WP

This mechanically-activated pump switch is designed to operate in non-potable wat...

The Pump Alternator Control and Alarm System is ideal for those wishing to maintain two primary pumps in the same pit. DVSA alternator lengthens the life of both pumps by alternating usage, running one pump at a time. If your pit water conditions ...

Vertical float switch. 10VMWP Provides automatic control of a pump in water and effluent or sewage applications. The float switch stop can be moved up the rod to adjust the pumping range from .75" to 6.5". Upper and lower rubber grommets act as fl...

High Temperature SS pump float switch.

Pump Duty Mercury activated narrow angle float switch for automatic level control of sump pumps and other pump types. Rated 10 amp@ 120 VAC 1/2hp SPST. 221 F max. Use for pump down, normally open contact, ap...