My Cart

N992R Gear Pump & Mtr & Relief

1/3HP 115v ODP Relief valve
Model Number
N992R-F41
$936.10
Bronze rotary gear pump with electric motor and relief valve

Oberdorfer N992R-F41

Bronze rotary gear pump with relief valve, electric motor.Gear Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life. Includes relief valve in pump head.

Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of liquid relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100 psi for water and non-lubricants, 150 psi for oil and lubricants. Maximum shaft speed is 1750 rpm.

A relief valve is necessary in the system if the discharge line contains any throttling devices, such as a shut-off valve, a spray nozzle or other restrictive device. This will return the liquid to the suction side or to the tank. The relief valve is also available as part of the pump itself (R-model pumps). However, built-in relief valves are only good for intermittent service. A built-in relief valve is strictly a safety device against over pressure. It will not work successfully as a pressure or flow control device. For this purpose a separate relief valve in the pressure line must be used.

Service life will be increase substantially if the liquid pumped is clean and has a lubricity value. These pumps have extremely close tolerances.

More Information
Model Number N992R-F41
part number N992R-F41
Series N992 Gear Pumps
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 346
TDH Maximum (PSI) 150
Horse Power (HP) 1/3
Horsepower (IE .5, 1, 1.5, 20) 0.3300
Inlet Connection Type FNPT
inlet size Less than 1"
Inlet (In.) 0.38
Outlet Connection Type FNPT
Outlet (In.) 0.38
Wetted Materials 304SS, Bronze
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor ODP
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 140
Viscosity Glycerine 880.00 cp 5000.00 ssu
Shaft 304SS
Mechanical Seal LIP SEAL
Mechanical Seal Type Single
Motor Bearings Ball
Coupling Y
Pump Bearing Carbon
Impeller Material Bronze
Cord Length (Ft.) 0
Duty Continuous
Drain No
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 30.000000
Warranty (YRS.) 1
>