My Cart

SE2HL D5.0C

5HP 230/460v
Model Number
58-12H4-D5.0C
$1,370.00
pacer s pump electric frp

Pacer 58-12H4-D5.0C

S pump close coupled to a TEFC 5 HP 230V/460v electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride, salt brine. For on-truck applications see same pump with gasoline engine. See Curve "H" 

Pacer's S Series Self-Priming Centrifugal pumps are lightweight and chemically resistant for general service on water, salt water, waste water, mild acids and bases.  This is our most popular pump across multiple markets.  They feature stainless steel internal fasteners; FKM®, EPDM or Buna O-rings with stainless steel external fasteners.  There is a non-metallic option which minimizes solution contact with internal metal parts.  The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids. 

Features

  • constructed from polyester, polypropylene or Ryton® 
  • FKM®, EPDM or Buna-N elastomers
  • Stainless steel or non-metallic fasteners for resistance to chemical attack
  • Choice of drives: electric motor, gasoline or diesel driven, hydraulic
  • Close-coupled, long-coupled or pedestal mounted
  • Built-in check valve
  • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
  • Suction lift to 25 ft. (7.6m) vertical
  • 1 1/2", 2" or 3" ports, NPT
More Information
Model Number 58-12H4-D5.0C
Series Pacer S Self Priming Pump to 280gpm
Max Flow (GPM.) 180
Max Flow GPH 10800
TDH Maximum (Ft) 90
TDH Maximum (PSI) 39
TDH BEP (FT.) 40.000000
Horse Power (HP) 5
Horsepower (IE .5, 1, 1.5, 20) 5.0000
Inlet Connection Type FNPT
inlet size 2"
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 316SS, Polyester
Elastomers / O-ring EPDM
Voltage (V) 230/460
Voltage (Range) 220-240/460-480
Phase (Ø) Three (3)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 143/5TC
Self Priming Yes
Suction Lift (FT.) 25
Max Operating Temperature (F) 120
Viscosity Cream 16.50 cp 100.00 ssu
Shaft Sleeved CS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Number (In.) H
Other Pump and motor are fully assembled and mounted on a epoxy coated steel base plate. Internal fastners are 316 SS and external fastners are 304 SS.
Impeller Material FRP
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 110.000000
Warranty (YRS.) 1
>