My Cart

Air Drum Pump Motor

Pneumatic
Model Number
A1
$770.00
Standard A1 Air Drum Pump Motor

Standard A1

Drum pump air pneumatic motor SP-A1.

Air Motor For flammable liquids us this motor with one of the metal - Stainless or Aluminum drum pump tubes sold separately. If used for other chemicals you can use the PP, CPVC or Kynar pump tubes also.

Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring flammable / combustible liquids. Operating pressure = 92 psi ( 6.3 bar), includes muffler and ball valve 1/8" ( 3mm) air inlet. RPM= 7500. WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SS) when pumping flammables. Air motors are not recognized under any current Underwriter Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Made in USA

More Information
Model Number A1
Series Drum Pump Motors Electric Air
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Motor Air-Pneumatic
Self Priming ----
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Other Typical air consumption is from 5-15CFM.

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-6600 or SP-7600) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Country of Manufacture United States
Weight (Lbs) 3.000000
Warranty (YRS.) 3
>