My Cart

2.5" Hydraulic water pump submersible

2-1/2"
Model Number
SP25
$1,050.00
HDI_sp20 hydraulic water pump

HDI SP25

The SP25 compact submersible pump is a light weight, efficient way to move large volumes of liquids quickly.

This submersible dewatering centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing hydraulic fluid. A semi closed designed stainless steel impeller will not corrode and will draw down water to a depth of only 1 inch. 

Pump can handle the removal of water containing solids up to 30%. It is perfect in the pumping sites of water, sand slurries, gravel and sludge on job sites.

The SP25 is fitted with flush face coupler that threads directly into SAE ports, No Npt hydraulic joints to weep. The SP25 Water Pump comes with a 2-1/2” male NPT output port fitted with a 2-1/2” Cam Loc fitting standard.

ORI

Hydraulic motor must return into a open / non-pressurized reservoir open circuit. Back pressure on the discharge / return side of the hydraulic will damage shaft seal. Skid steer need to be aware of this.

More Information
Model Number SP25
Series Hydraulic Submersible Pumps
Max Flow (GPM.) 275
Max Flow GPH 16500
TDH Maximum (Ft) 150
Outlet Connection Type FNPT
Outlet (In.) 2.5
Wetted Materials 316SS, Aluminum
Self Priming Yes
Viscosity Water 1.00 cp 31.00 ssu
Mechanical Seal No
Other includes 2" camlock(quick disconnect)
Drain Yes
Port Rotation Yes
Weight (Lbs) 12.000000
>