My Cart

2HP Submersible Dewatering pump

2HP 230v/3
Model Number
2KTM203
$2,105.00
Barmesa 2ktm2 electric submersible dewatering pump

Barmesa 2KTM203

Submersible Sand Trash Dewatering Pump.

KTM Series - Versatile Submersible Dewatering Pumps

Barmesa Pumps KTM series submersible dewatering pumps are designed for removing muddy water from construction sites, mines, quarries, flood control, and as a portable utility.  The impeller and pump cover is made of high chrome steel to protect the pump from highly resistant water.  The interior of the pump is designed to operate continuously even when partially submerged.  Discover which model will work best for you

Manual Submersible Dewatering Pump. Handles algae and other debris up to 3/8″ x 1″ in size.

  • BEARINGS - Ball, single row, permanently oil lubricated for 60,000 hours of work. Designed for radial and axial loads.
  • CORD ENTRY - 50 ft of neoprene cord, sealed against moisture
  • SEAL Design: double, mechanical, oil filled chamber.
  • SEAL Material: Double- upper part of carbon-SiC, lower part of silicone carbide. Stainless steel hardware. Oil filled chamber
  • MOTOR - three phase induction motor, 230 & 460 volts, 60 Hz, 3450 RPM. Insulation class F and IP68 protection class
  • STRAINER - Polyvinyl chloride (PVC).
  • HANDLE - Metal.
  • PUMP OPERATION - Manual, does not include level control
  • PAINT -Air dry enamel, water based.
  • O-RINGS - Nitrile rubber (NBR).
  • HARDWARE - 304 series stainless steel.
  • SHAFT -410 series stainless steel.
  • IMPELLER Design: semi-open type, high chrome alloy.
  • OIL CHAMBER - Cast iron FC-200.
  • MOTOR HOUSING Cast Iron class 30
  • PUMP BODY Cast iron class 30
  • DISCHARGE - 2" Hose barb vertical, NPT adapter included.
  • SOLIDS HANDLING - 3/8 inch.

three phase induction motor, 230 & 460 volts, 60 Hz, 3450 RPM. Insulation class F and IP68 protection class

 

More Information
Model Number 2KTM203
part number 70090231
Series Barmesa Industrial Pumps
Max Flow (GPM.) 115
Max Flow GPH 6900
TDH Maximum (Ft) 75
TDH Maximum (PSI) 32
Horse Power (HP) 2
Horsepower (IE .5, 1, 1.5, 20) 2
Outlet Connection Type MNPT
Outlet (In.) 2
Wetted Materials Cast Iron
Elastomers / O-ring Urethane
Voltage (V) 230
Voltage (Range) 208-240
Phase (Ø) Three (3)
Motor Frequency 60
Motor Amps (A) 5.5
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 104
Max Particle Size (In) 0.3
Viscosity Milk 3.20 cp 40.00 ssu
Length (In.) 21
Mechanical Seal double mechanical, oil filled chamber
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Max. Diameter (inch) : 9-1/4", Max. Height (inch): 12 15/16. C.W.L.: continuous running water level 4.7".
Impeller Material semi-open type, high chrome alloy.
Cord Length (Ft.) 50
Duty Continuous
Port Rotation No
Weight (Lbs) 79.000000
Warranty (YRS.) 1
GPM Of Water At 40 Feet Of Head 92
GPM Of Water At 60 Feet Of Head 55
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".