316SS Self prime pump FMX75-SP-HYD
-
Model Number:
36212
-
Product Name:316SS Self prime pump FMX75-SP-HYD
-
Manufacturer:
-
Series (19 Models):
Hydraulic motor .08DISP
Model Number
36212
$1,530.00
MP 36212
Hydraulic 316SS Self Prime Pump for chemicals, salt water or many other
liquids where corrosion is a problem. Marine Boat air conditioning
is a big market for these pumps. Model FMX 75-SP-HYD is a
high performance self-priming 316 stainless steel centrifugal pump with hydraulic motor drive.
The pump is ideal for marine,industrial, agricultural or commercial
applications where suction lift is required.• Marine
Air Conditioning• Marine Refrigeration• AG
-chemical spraying, bulk transfer, mixing or blending•
Hydraulic Cooling• Bait Tank
The O-ring/flapper design enhances the self-priming capability to 12 foot suction lift. Marine ignition protected motors available. 316 Stainless Steel (Investment Cast). 1/8" NPT Fill Port.
Originally designed for marine air conditioning installations when the pump mounting location is prone to air-lock or requires a suction lift. Even when a pump is mounted below the waterline an air-lock can occur due to hull motion when the vessel is underway. Pump will purge air from the system and eliminate “Air-Lock” from becoming an irritating issue. Motor is a Hydraulic type.
The hydraulic motor is designed with SAE #6 ports for the tank side while the pressure side has SAE # 4 ports. Maximum Pressure is 1000 PSI. Maximum oil flow is 3 GPM.
| Model Number | 36212 |
|---|---|
| part number | MP36212 |
| Series | 316SS Pump FRX FMX |
| Max Flow (GPM.) | 21 |
| Max Flow GPH | 1260 |
| TDH Maximum (Ft) | 25 |
| TDH Maximum (PSI) | 11 |
| TDH BEP (FT.) | 18.000000 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 0.75 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.75 |
| Wetted Materials | 316SS |
| Elastomers / O-ring | FKM |
| Motor | Hydraulic Motor |
| Speed (RPM.) | variable |
| Self Priming | Yes |
| Suction Lift (FT.) | 12 |
| Max Operating Temperature (F) | 180 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Motor Bearings | Ball |
| Other | Hydraulic Motor Displacements: .08 cu. inch, max oil flow req'd 2.5gpm at 800psi. See chart. |
| Impeller Material | 316 SS, semi-open |
| Duty | Cont |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 18.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
