My Cart

NSF Water Pump kit Gas Engine

Kit for Gas Engine SS 2"
Model Number
IPW2WL
$1,100.00
Stainless steel engine drive water pump NSF kit

Pacer IPW2WL

NSF Water Pump KIT for Gas Engine.

Stainless Steel Self-Priming Centrifugal water Pump for gas engine powered, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve. Requires 5hp engine with 3/4" keyed shaft and 5/16-24 end tapped hole (Pacer pump engine). P-57-12W4

These pumps are standard for mobile shower or personal water resource systems often found in mobile operations. Use for portable water systems or field camps. Case is polished 304 SS, drive included is Honda gas engine. NO roll cage.

Pump shown in picture does NOT includes roll cage 58-0009 or gas engine. The repair kit is 58-0099 

NSF potable water version 

NSF/ANSI 61 & 372, the American National Standard for Drinking Water System Components. This certification comes from the global public health organization NSF International. Available now is our IPW Series of self-priming centrifugal pumps. The IPW Series is a self-priming centrifugal pump with a vertical suction lift of 20 feet and a maximum flow rate of 180 gallons per minute. It is ideal for transferring and delivery of bulk potable (drinking) water. Pump construction features stainless steel casing, FDA grade polypropylene internal components and FDA grade elastomers.

Electric versions of this NSF/ANSI certified pump are available along with other types and smaller sizes of potable driinking water pumps

Available drivers include gasoline engine, electric motor, hydraulic motor and bearing pedestal mounted. Also available as a wet end only to replace an existing Pacer Pump. 

More Information
Model Number IPW2WL
part number P-57-12W4
Series I Stainless Self Prime pump 140 gpm
Max Flow (GPM.) 180
Max Flow GPH 10800
TDH Maximum (Ft) 76
TDH Maximum (PSI) 33
HP Required 5
Inlet Connection Type MNPT
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 304SS, Polyester
Elastomers / O-ring EPDM
Speed (RPM.) 3450
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 130
Viscosity Milk 3.20 cp 40.00 ssu
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Other Connections are dual 2" outside and 1.5" NPT inside double thread. Includes 1/4" drain plug.
Approvals NSF
Impeller Material FRP, semi-open
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 15.000000
Warranty (YRS.) 1
GPM Of Water At 20 Feet Of Head 160
GPM Of Water At 40 Feet Of Head 125
GPM Of Water At 50 Feet Of Head 85
GPM Of Water At 60 Feet Of Head 60
>