My Cart

Plastic Corrosion Resistant pump PCE2AL-G.5C

115/230v 1/2 HP
Model Number
60-11A4-G.5C
$765.00
Pacer PCE2CL-D2.0C 60-12C4-D2.0C Plastic Corrosion Resistant

Pacer 60-11A4-G.5C

Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

PC Horizontal Pump

All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvents, and salt water at temperatures as high as 200F (93C). "O"-rings and seals are FKM, EPDM or Buna N. Fasteners are stainless steel, with titanium or Hastelloy C internal fasteners, shaft seal and shaft adapter and Pacer's own Polymar non-metallic shaft seal for pumping highly corrosive liquids. Often used in aquaculture, lobster tanks, aquarium salt water

The 1 1/2" and 2" models are the same pump with both ports threaded 1 1/2" female and 2" male. The 3" pump has male threads only.

Pumps may be ordered with a chemical resistant Noryl bearing pedestal for long coupled direct drive or a cast iron pedestal for belt drive or heavy duty service. Close-coupled drives include electric, hydraulic or pneumatic motors and gasoline engines through 8HP.

  • Non-metallic solution contact models available in all stock materials
  • Flows to 230 U.S. GPM or 94 ft. TDH at 60 Hz (725 LPM or 20 M at 50Hz)
  • Selection of drives-- Electric, Hydraulic or Pneumatic motors. Gasoline or Diesel Engines.
  • Now available close-coupled to electric motors through 5HP
  • Silicon Carbide seal available as option

Pacer Pumps is the originator and is recognized as the leading manufacturer of high-performance centrifugal pumps molded from tough modern thermoplastics. Our brand and service is often imitated but never duplicated. Successful adaptation of these products for agricultural, aquaculture, marine, farm/home and industrial applications has resulted in worldwide market acceptance. From farmers to fishermen to industrial mechanics, people turn to Pacer for quality pumps. 

More Information
Model Number 60-11A4-G.5C
Series PC Plastic Corrosion Resistant Pump To 230gpm
Max Flow (GPM.) 80
Max Flow GPH 4800
TDH Maximum (Ft) 30
TDH Maximum (PSI) 14
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) .5
Inlet Connection Type FNPT
inlet size 1 ½"
Inlet (In.) 1.5
Outlet (In.) 1.5
Wetted Materials PPO-Noryl, SS-Plastic
Elastomers / O-ring EPDM
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Self Priming No
Max Operating Temperature (F) 160
Viscosity Milk 3.20 cp 40.00 ssu
Shaft 316SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Motor Bearings Ball
Impeller Number (In.) A
Other Pump is molded of glass reinforced polyester with ethylene propylene "O" rings, standard volute, 316SS internal hardware, 304SS external hardware. Motor shaft is extended with 316SS adapter.
Do not pump substances which have pH factor of over 10 or a temperature of over 160 Deg. F. The PERFORMANCE CHART is based on water.
Impeller Material Polyester, semi-open
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 30.000000
Warranty (YRS.) 1
GPM Of Water At 20 Feet Of Head 40
>