Vertical Centrifugal Pump
-
Model Number:
VPJ25A
-
Product Name:Vertical Centrifugal Pump
-
Manufacturer:
115v 1/25HP 5"
Model Number
VPJ25A
$494.00
Graymills VPJ25A
Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron or stainless pump.
Temporarily out of stock!
VP Series pumps are specially designed to withstand highly abrasive and/or corrosive liquids. The high strength glass-filled thermoplastics construction of these pumps provides a cost-effective alternative to brass or stainless steel.
All VP series pumps have permanently lubricated sealed ball bearing motors with guards in pump column to protect motor from splashing and vapors. A labyrinth chamber above the volute eliminates splashing at low liquid levels. VP pumps can be assembled in pump and tank systems. Available tanks are 1 and 2 gallon round stainless steel or polyethylene, and square stainless steel.
Note: Information about the flow curves: 1. VP50 Series 1/8 HP, electric or air motor, water2. VP40 Series 1/15 HP, water3. VP30 Series 1/15 HP, water
| Model Number | VPJ25A |
|---|---|
| Max Flow (GPM.) | 6 |
| Max Flow GPH | 360 |
| TDH Maximum (Ft) | 12 |
| TDH Maximum (PSI) | 5 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.0400 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 0.63 |
| Wetted Materials | 416SS, Acetal-Delrin |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50/60 |
| Motor | TENV |
| Speed (RPM.) | 2850 |
| Self Priming | ---- |
| Max Operating Temperature (F) | 180 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | 416SS |
| Length (In.) | 5.000000 |
| Mechanical Seal | No |
| Coupling | Y |
| Other | suitable replacement for OEM pumps like Gusher Ruthman |
| Weight (Lbs) | 11.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
