My Cart

Close Coupled Bronze Rotary Gear Pump

Model Number
N999RM-F07
$955.00
Oberdorfer N999RM-F07 Close Coupled Bronze Rotary Gear Pump

Oberdorfer N999RM-F07

Bronze gear pump mounted to a 1725rpm 1/3 HP motor. Pump has relief valve.

Features N999 Series:

  • Compact design eases installation and use in limited space areas.
  • Construction is bronze and stainless steel wetted components.
  • Close tolerance design allows for consistent performance
  • Helical gears for quiet operation.

Pump housings and gears are made of top quality bronze, shafts are 303 SS. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life.

Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of liquid relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100PSI for water and non-lubricants, 150PSI for oil and other lubricants. The maximum shaft speed is 1750 RPM.

Close coupled gear pumps are normally supplied with a Buna N lip seal. A lip seal made of FKM(R) is available as an option. For a FKM Seal, add S5 to the pump model number.

These pumps are suitable for all liquids that are compatible with bronze. Most common liquids are water, glycol, oil, and mild chemicals in the pH range of 4 to 11. Liquids containing solids, abrasives, powders, or paint pigments are definitely not recommended for gear pumps.

More Information
Model Number N999RM-F07
part number N999RM-F07
Series N999 Bronze Gear pumps
Max Flow (GPM.) 2
Max Flow GPH 120
TDH Maximum (Ft) 231
TDH Maximum (PSI) 100
Horse Power (HP) 1/3
Horsepower (IE .5, 1, 1.5, 20) 0.3300
Inlet Connection Type FNPT
inlet size Less than 1"
Inlet (In.) 0.25
Outlet Connection Type FNPT
Outlet (In.) 0.25
Wetted Materials 304SS, Bronze
Elastomers / O-ring Buna-Nitrile
Voltage (V) 230
Voltage (Range) 220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor ODP
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 10
Max Operating Temperature (F) 140
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Length (In.) 15.000000
Mechanical Seal LIP
Mechanical Seal Type Single
Other As a general rule, the suction lift should be kept at an absolute minimum by placing the pump as close to the liquid source as possible. A gear pump in new condition can lift 20 feet of water in the suction line. A foot valve (preferably with builtin strainer) is recommended at the beginning of the suction line. For a first start-up, the pump should be primed to avoid dry running. MInimum size of the suction pipe is the size of the pump inlet port. For longer suction lines (over 3 feet) or for viscous liquids, the pipe should be at least one size or two sizes larger than the pump inlet port. Motor is a modified 48 frame.
Drain No
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 30.000000
Warranty (YRS.) 1
>