Self-Priming Pump
Self priming pumps are able to pull prime after loosing prime or in
some cases can run dry and initiate priming. Centrifugal pumps
which are called self-priming actually need to be primed the very
first time and then after should hold prime or start up again if
pump has retained its priming liquid in its volute. These pumps do
not prime from a dry condition.
The second type of Self Priming pump is a positive displacement one and can pull prime completely on its own from often a dry condition.
Self-priming pumps all have a common limit to how high they can lift or prime. This is often 25 feet maximum and with some pumps may take up to 5 minutes.
-
Franklin Pumps
High Pressure Trash Pump FMIG40-18K
90281218
Call For PriceHeavy duty self priming pump of all iron construction MIG40. High pressure semi-trash pump for irrigation, marine, pile driving, industrial and de-watering. Engine has Electric Start & Low oil shut off, NO fuel tank, option or customer supplied fo...
MIG 18HP Kohler High Pressure Trash pump Learn More -
Franklin Pumps
FBSE-150-S pump
92931015
Call For PriceSelf priming centrifugal water pump with built-in check valve. Casing: Cast Iron; 2" NPT suction & discharge; semi-open impeller Motor: CSA approved; equipped with stainless steel shaft and automatic thermal overload protection. Square flange ...1.5HP 115/230v Learn More -
Franklin Pumps
FBSE-100-S pump BSE
92931010
Call For PriceSelf priming centrifugal water pump with built-in check valve. Casing: Cast Iron; 1.25 NPT suction & discharge Motor: CSA approved; equipped with stainless steel shaft and automatic thermal overload protection. Old model # BSE-1001HP 115/230v Learn More
