Self-Priming Pump
Self priming pumps are able to pull prime after loosing prime or in
some cases can run dry and initiate priming. Centrifugal pumps
which are called self-priming actually need to be primed the very
first time and then after should hold prime or start up again if
pump has retained its priming liquid in its volute. These pumps do
not prime from a dry condition.
The second type of Self Priming pump is a positive displacement one and can pull prime completely on its own from often a dry condition.
Self-priming pumps all have a common limit to how high they can lift or prime. This is often 25 feet maximum and with some pumps may take up to 5 minutes.
-
Flojet Pumps
Quad Sensr VSD .75 hose barb
R4400-504
$299.00Flojet’s quad Variable Speed Drive (VSD) system needs no accumulator tank. Its microprocessor provides precise speed control to match the system demand. As more water is needed, the motor drives the pump for more flow. As the demand lessens, th...Notice:This Product has been discontinuedLearn More -
Flojet Pumps
Demand Spray Pump
LF152421
$179.00Demand Spray Pump. Far and away the best selling pump in the industry. Choose from standard models or configure to meet the special needs of your OEM application. Long-life (2000 hours typical) motors have either a chemically resistant plastic ho...12vdc Learn More -
Flojet Pumps
Industrial Demand Pump
2100-789
$675.60Spray pump is a Duplex Diaphragm demand pump 115v. Use as a carpet cleaning machines, solar water pump or any other powered shower, sprinkler, misting system. Demand switch automatically turns the spray pump on and off when discharge valve is o... -
Flojet Pumps
High Flow Booster System
2840-000
$689.00Designed to provide a constant water pressure of 40 PSI and flows to 4.5 GPM. The pump is fully automatic, with built-in inlet strainer, pressure switch, and check valve, and supplies a smooth flow from a trickle to full flow. 115vIncludes cord ...
