My Cart 0

4" Hydraulic trash pump

Gallons Per Hour:
52500 (875 GPM)
4"
SKU
TP40
$1,800.00
HDI submersible hydraulic trash pump 4"

Hydraulic TP40 compact submersible trash pump is a light weight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very quickly. This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing. 

Pump can handle the removal of water containing solids up to 30%. It is perfect in the pumping sites of water, sand slurries, gravel and sludge on job sites.

This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing hydraulic fluid. A durable steel bowl and ductile iron impeller and aluminum Wear Plate are very durable and capable of moving liquids containing up to 30% solids. If you are pumping oily sludge, septic systems, muddy trenches or even clean water this a pump for you. The TP40 is fitted with flush face couplers that threads directly into SAE ports, No NPT hydraulic joints to weep. The TP40 Trash Pump comes with a 3” male NPT output port fitted to a 4” Cam Loc fitting standard. 

Hydraulic flow 7-11gpm up to 2000psi

Hydraulic motor must return into a open / non-pressurized reservoir open circuit. Back pressure on the discharge / return side of the hydraulic will damage shaft seal. Skid steer need to be aware of this.

More Information
Model Number TP40
Series Hydraulic Submersible Trash Pumps
Max Flow (GPM.) 875
Max Flow GPH 52500
TDH Maximum (Ft) 45
Outlet Connection Type Quick connect
Outlet (In.) 4
Wetted Materials Aluminum, CI, Steel
Motor Hydraulic Motor
Max Operating Temperature (F) 104
Max Particle Size (In) 3
Viscosity Catsup 3000.00 cp 20000.00 ssu
Mechanical Seal No
Applications Contractor, Dewatering, Sewage, Slurry, Slush & Sludge, Submersible
Other Cast iron impeller and steel bowl. Able to run dry without damage. Hyd. System relief valve should be set at 2000psi. Porting: #10 SAE (Press.) #12 SAE (Ret). Connect Size and Type 1/2 in. Male Pipe (Press.) 3/4 in. Male Pipe (Ret).
19"x15"x19"
Approvals CE
Impeller Material Cast Iron, non-clog
Duty Continuous
Country of Manufacture United States
Weight (Lbs) 56.000000
Time to Ship (DAYS) 1 day

Supporting Docs

Supporting Docs
(Size: 55.15 KB) Extension: gif