My Cart

115V Water booster pump Flux Boosting System

1/2HP 115v Pressure boosting, Automatic, Flow
Model Number
FBSMS0515G30P-A
$1,034.00
Pedrollo FBSMS0515G30P-A 115V Water booster pump Flux Boosting System

Pedrollo FBSMS0515G30P-A

Pedrollo Flux Boosting System or Booster Pump System starts and stops the water pump according to the user's water boosting needs. Automatic booster pump. The FLUX replaces the traditional pressure system of a tank, pressure switch, and float switch. Use to boost houshold water pressure or sprinkler system.

Therefore the system has the following advantages:

  • Flow activated system*, excellent with city water line, well pump, above ground storage tank*
  • Easy installation
  • Reduced dimensions
  • Constant Flow
  • No pressure tank required
  • Pump protection against running dry, with automatic reset
  • No maintenance required
  • Flux Inline Water Boosting Systems by Calpeda Pump include a water pump and an electronic controller which are used in residential applications when it is necessary to boost the city water pressure. They are easy to install, require no scheduled maintenance, do not need a pressure tank on most installations and include protection against running dry.

Operation: When a tap is opened and the water demand exceeds the minimum starting flow*. Flux starts the pump and keeps it running, delivering constant flow, even when the capacity request is low. Flux control stops the pump when the demand is below 0.5 GPM*. In case of a leak in the system (less than .5 GPM) the Flux Control will not start the pump avoiding useless power consumption. Ideal for average to large two story homes or long runs of plumbing. Five water outlets can be operated at the same time without substantially reducing performance.

See images and product bulletins above. 

Similar to obsolete 3075ss-01

More Information
Model Number FBSMS0515G30P-A
Series Booster Pump System with FLUX pump controller
Max Flow (GPM.) 25
Max Flow GPH 1500
TDH Maximum (PSI) 43
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials SS-Plastic
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Self Priming No
Max Operating Temperature (F) 120
Viscosity Water 1.00 cp 31.00 ssu
Shaft 304SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Other See performance chart under IMAGE tab for flow and pressure boost values.
Be sure that the maximum flow of the water meter will not be exceeded or more than 5psi drop. It See chart. It is recommended for residential applications, 75 psi maximum discharge pressure in order to prevent damage to piping. If above use a pressure reducing valve.
Impeller Material Noryl plastic
Cord Length (Ft.) 8
Drain Yes
Port Rotation No
Country of Manufacture Italy
Weight (Lbs) 16.000000
Warranty (YRS.) 2

Supporting Docs

Supporting Docs
pdf
(Size: 55.29 KB) Extension: pdf
pdf
(Size: 62.53 KB) Extension: pdf