My Cart

24v Elect. diaphragm pump

Model Number
5852-1F12-B423
$193.00
Aquatec 5852-1F12-B423 24v Elect. diaphragm pump
580 Series Super Flow Pump: These pumps are specifically designed for mobile low flow or low voltage applications such as RO water systems, pesticides and fertilizers. 24 VAC. Pressure switch set at 70 PSI. Connections are 3/8 " John Guest fittings, push to connect.

OPERATION: The 580 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motor is 24 VAC. Order Transformer for 115vac seperately MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. The hole pattern matches those of Flojet and ShurFlo brands for easy drop in replacement. FITTINGS: The standard pump head has 1/2 NPT female ports.The pump can be ordered with a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. See model designation

*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases

Click here if you need a strainer for this pump

More Information
Model Number 5852-1F12-B423
Series 580 Water pump Electric Diaphragm
Max Flow (GPM.) 1
Max Flow GPH 60
TDH Maximum (Ft) 162
TDH Maximum (PSI) 70
inlet size Less than 1"
Inlet (In.) 0.38
Outlet (In.) 0.38
Wetted Materials PolyPro-GF
Elastomers / O-ring Geolast
Diaphragm Santoprene
Voltage (V) 24DC
Voltage (Range) 12/24/36 VDC
Motor TENV
Self Priming Yes
Suction Lift (FT.) 11
Max Operating Temperature (F) 145
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Length (In.) 9.000000
Mechanical Seal No
Mechanical Seal Type Double
Other Pressure switch is adjustable within certain range 60- 70 psi. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. NOT for use with flammable liquids.
Drain Yes
Port Rotation Yes
Weight (Lbs) 7.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 255.71 KB) Extension: pdf