My Cart

2-MD-HC

Model Number
580603
$527.29
Little Giant 580603 2-MD-HC
The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are glass-filled Ryton for excellent chemical resistance. Ceramic shaft and thrust washers are 99.5% pure alumina for excellent wear and trouble-free service. Pumping heads are easily rotated, cleaned or serviced with no special tools required. Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump. For highly corrosive chemicals and solutions. Though no pump should be operated dry, the MD-HC Series has a run-dry capability of up to eight hours without damage.
  • Thermally Protected, Open, Fan-Cooled, Motor
  • Sleeve Bearings
  • 6' Power Cord with 3-Prong Plug
  • Ambient Air Temperature to 77ï½°F
  • 3100 RPM
  • 131 Watts
More Information
Model Number 580603
Series MD-HC Mag Hi Corrosive
Max Flow (GPM.) 9
Max Flow GPH 540
TDH Maximum (Ft) 15
TDH Maximum (PSI) 6
Horsepower (IE .5, 1, 1.5, 20) 0.0300
Inlet Connection Type FNPT
inlet size Less than 1"
Inlet (In.) 0.5
Outlet Connection Type MNPT
Outlet (In.) 0.5
Wetted Materials Ryton-PPS GF
Elastomers / O-ring Viton
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Open
Self Priming Yes
Max Operating Temperature (F) 200
Viscosity Cream 16.50 cp 100.00 ssu
Shaft Ceramic
Mechanical Seal No
Mechanical Seal Type Double
Drain Yes
Port Rotation Yes
Weight (Lbs) 6.000000

Supporting Docs

Supporting Docs
pdf
(Size: 139.95 KB) Extension: pdf