My Cart

12vdc Dia. Pump

Model Number
Flojet 04300-143 12vdc  Dia. Pump
Industrial QUAD pump - Developed to deliver higher flows up to 4.8 GPM using a four piston design with excellent self-priming capability. Built-in pressure switch automatically starts at 30psi and stops pump at its 45 PSI setting.

Santoprene diaphragm is an EPDM based thermoplastic elastomer and is resistant to mild acids, some solvents and bases.

Can run dry and hadle liquids up to 130F. Great for car / auto / boat detailing or other applications. Can be mounted to tank for true portable water source. See our HoundWash™.

The Flojet 4300 Quad Pump can automatically provide a maximum 45 psi water pressure to a pressure tank, holding tank, or directly to a faucet, with a flow rate of up to 4.9 gallons per minute. This Flojet 4300 is the Heavy Duty model, an industrial series 12 Volt DC quad demand pump with a built in pressure switch. It is rated at 13 amps, but at 4.9 GPM that still translates into outstanding efficiency. It comes complete with snap-in 3/4" hose barbs for easy installation.

More Information
Model Number 04300-143
Series Electric Spray Pump to 5gpm
Max Flow (GPM.) 5
Max Flow GPH 300
TDH Maximum (Ft) 97
TDH Maximum (PSI) 45
Inlet Connection Type Barb
inlet size Less than 1"
Inlet (In.) 0.75
Outlet Connection Type Barb
Outlet (In.) 0.75
Wetted Materials PolyPro
Elastomers / O-ring EPDM
Diaphragm Santoprene
Voltage (V) 12DC
Voltage (Range) 12/24/36 VDC
Motor TEFC
Speed (RPM.) 2850
Self Priming ----
Suction Lift (FT.) 15
Max Operating Temperature (F) 130
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Length (In.) 10.900000
Mechanical Seal No
Motor Bearings Ball
Other 30 PSI Cut-in, 45 PSI Cut-out. 4" high, 10" long, 4" wide.
Cord Length (Ft.) 1
Duty Intermittent
Drain No
Country of Manufacture United Kingdom
Weight (Lbs) 8.000000
Warranty (YRS.) 1