My Cart

1-YS -115 Parts washer pump

115v
Model Number
501020
$198.38
Little Giant submersible solvent pump
Parts washer solvent pump.

Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6 foot power cord without plug has "Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Thermally protected.

FEATURES

  • Oil-filled Aluminum Housing
  • Nylon volute & impeller
  • Conduit fitting for mounting
  • Submerged use only in parts washers
  • Double-lip Viton shaft seal
  • For use with UL (PJQU) solvents
  • 205 GPH @ 1
  • 6 foot cord, no plug
  • Thermally protected
More Information
Model Number 501020
Series solvent acid pumps
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 7
TDH Maximum (PSI) 3
Outlet Connection Type MNPT
Outlet (In.) 0.25
Wetted Materials Aluminum, Nylon
Elastomers / O-ring Viton
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Speed (RPM.) 1725
Self Priming Yes
Max Operating Temperature (F) 120
Viscosity Water 1.00 cp 31.00 ssu
Mechanical Seal LIP
Mechanical Seal Type Single
Motor Bearings Bronze
Other 6 foot power cord (without plug)
Approvals UL
Cord Length (Ft.) 3
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 4.000000
Warranty (YRS.) 1
>