MY CART 0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.

Vertical Pumps

Set Descending Direction

   

Items 1 to 10 of 1744 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. submersible automatic utility pump submersible automatic utility pump
    Sale

    Glentronics sump pump

    Submersible Automatic Utility Pump

    BWU033PAS

    Submersible Automatic Utility Pump with built in solid state (no moving parts) electronic level control (float switch) for un-attended automatic dewatering of nuisance water. Perfect as a sump pump for window wells, utility pump basement / cellar ...

    1/3 HP 2,220 GPH (37gpm)

    22% Off Regular Price: $119.00

    Special Price $93.00

     Add to Cart Compare
  2. Graymills

    Vertical Machine Tool Coolant Pump CI

    FM73HA 1/4


    Graymills machine tool pumps are typically found on OEM machine
    tool equipment and are thus well suited for replacement or retrofit
    machine tool pumping applications. These pumps can also be used on
    other industrial applications requiring a verti...
    1/4 HP 115V
  3. Graymills

    Vertical CI Coolant pump

    FM712HB 1/4


    Graymills coolant pump is typically found on OEM machine tool
    equipment and are thus well suited for replacement or retrofit
    machine tool pumping applications. Coolant pump can also be used on
    other industrial applications requiring a vertical ca...
    1/4HP 230V
  4. Graymills

    Vertical CI Coolant Pump

    FM76HA 1/4


    Graymills coolant pump is typically found on OEM machine tool
    equipment and are thus well suited for replacement or retrofit
    machine tool pumping applications. These pumps can also be used on
    other industrial applications requiring a vertical cas...
    1/4HP 115V
  5. Graymills

    Vertical CI Centrifugal Pump & Mtr

    TNW68F 1


    Graymills pumps are typically found on OEM machine tool equipment
    and are thus well suited for replacement or retrofit machine tool
    pumping applications. These pumps can also be used on other
    industrial applications requiring a vertical cast iron...
  6. Graymills

    Vertical CI Centrifugal Pump & Mtr

    HR49B 1/8


    Graymills pumps are typically found on OEM machine tool equipment
    and are thus well suited for replacement or retrofit machine tool
    pumping applications. These pumps can also be used on other
    industrial applications requiring a vertical cast iron...
  7. Graymills

    Parts Washer pump

    VPJ38A 1/15


    Graymills parts washer pump used in the Handi-clean parts washers
    or on OEM machine tool equipment and are thus well suited for
    replacement or retrofit machine tool pumping applications. These
    parts washer pumps can also be used on other industri...
  8. Graymills

    Vertical CI Centrifugal Pump & Mtr

    TN48E 1/2


    Graymills pumps are typically found on OEM machine tool equipment
    and are thus well suited for replacement or retrofit machine tool
    pumping applications. These pumps can also be used on other
    industrial applications requiring a vertical cast iron...
    115/230v 1/2HP
  9. Graymills

    Vertical CI Centrifugal Pump & Mtr

    TN33HE 1-1/2


    Graymills pumps are typically found on OEM machine tool equipment
    and are thus well suited for replacement or retrofit machine tool
    pumping applications. These pumps can also be used on other
    industrial applications requiring a vertical cast iron...
  10. AMT

    Bronze Coolant Recirculating Pump

    4230-97

    The AMT Bronze Coolant Recirculating pump has been manufactured
    for a wide variety of Industrial Commercial Coolant and
    Recirculating applications. The absence of a bottom bearing makes
    the unit ideal for handling erosive liquids. A 36" 3-condu...

    1/25 HP 115V AC

    25% Off Regular Price: $204.00

    Special Price $153.00

     Add to Cart Compare
Set Descending Direction

   

Items 1 to 10 of 1744 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5