Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Heavy Duty High Flow Centrifugal
315B-95
$1,296.00Heavy Duty High Flow Centrifugal Pump, cast iron
AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, re-circulation, booster service and other industrial applications. Semi-open impeller fea...
230/460v 3HP TEFC CI Learn More -
Finish Thompson Pumps (FTI)
FTI DB5.5 Magnetic coupled pump Polypro
DB5.5P-M226
$905.98Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/2 Hp 115V, 60 Hz TEFC Learn More -
Finish Thompson Pumps (FTI)
DB5.5V-M613 pump Kynar
DB5.5V-M233
$961.63Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-couple...
1/4 Hp 115V, TEFC, Kynar Learn More -
AMT Pumps
High Head SS Straight Centrifugal Pump
5537-98
$950.00High Head AMT Stainless Steel Straight Centrifugal pump 2hp
is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requirin...
2HP 3-Phase AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contaminant free pumping. Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
4901-95
$1,008.00High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...208-230/460v 3HP ODP Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
490A-95
$1,047.60High Head CI Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, press...230v 3HP TEFC Learn More -
AMT Pumps
Selfprime pump
276C-95
$1,205.00Self-priming pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8" diameter...
230/460v 3HP TEFC Learn More -
AMT Pumps
Self Priming 2" Electric Pump
2767-95
$1,205.00Electric 3hp solids handling pumps is self priming and designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These CI pumps feature self-cleaning clog resistant impeller ...230v/1 3HP ODP 2" Learn More -
American Stainless
SS pump & motor
C15425B3T3
$992.36Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3HP 230/460V TEFC Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
490C-95
$938.40High Pressure Centrifugal Pump Series Page Link. High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildin...2HP 115/230v/1 TEFC Learn More