My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 321

Set Descending Direction
per page
Page
  1. Finish Thompson DB10V-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10V-M207
    $1,612.74
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • PVDF construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation with IEC m...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  2. Barmesa 62070062 IB1.5-5-2-1 Center Line Discharge

    Barmesa Pumps

    IB1.5-5-2-1 Center Line Discharge

    62071062
    $2,648.00

    High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  3. 489e-98 AMT SS pump explosion proof

    AMT Pumps

    Centrifugal Pump Explosion Proof

    489E-X8
    $2,194.63

    Obsolete

    Explosion Proof straight centrifugal pump is designed for continuous duty low pressure flammable service applications including circulation, chemical processing, liquid transfer, cooling, hazardous locations. Cannabis Hemp CBD distillate...

    OBSOLETE Learn More
    Add to Wish List Add to Compare
  4. Barmesa - 62070025: IB2-3-2 Center Line Discharge pump

    Barmesa Pumps

    IB2-5-2 Center Line Discharge pump

    IB2-5-2
    $2,082.00

    Center Line Discharge End-Suction Centrifugal Pump.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. Top centerline discharge similar to many ANS...

    5HP 230/460v Learn More
    Add to Wish List Add to Compare
  5. Barmesa - 62210004: IA1-7.5-2 High Head pump

    Barmesa Pumps

    IA1-7.5-2 High Head pump

    62210004
    $1,855.00

    High Head End-Suction Centrifugal Pump.

    Commercial duty pumps featuring tangent discharge and retrofit to other OEM pumps often used on chillers, cooling towers. High head means higher pressure at medium flow rates

    Applications

    • Booster system...
    7.5HP 230/460v ODP Learn More
    Add to Wish List Add to Compare
  6. 282K-95_12_1.gif

    AMT Pumps

    Cast Iron Self Priming Explosion proof

    282F-X5
    $1,929.20
    AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling ...
    230/460v 3/4HP TEFC Explosion proof Learn More
    Add to Wish List Add to Compare
  7. amt explosion proof pump & motor

    AMT Pumps

    Centrifugal Pump XP Motor

    369C-X5
    $1,738.90

    Explosion Proof XP electric motor powered Cast Iron Centrifugal pump. Straight centrifugal pump is designed for continuous duty low pressure OEM, industrial / commercial and Hazardous Duty service applications including circulation, chemical proce...

    115/230v 1HP EXP Learn More
    Add to Wish List Add to Compare
  8. Ebara 2 stage 2CDu pump

    EBARA Pumps

    SS 2stage 2hp

    A2CDU70/206D3C
    $1,911.32
    Ebara 2HP High head pump A2CDU70/206D3C, 304 Stainless Steel SS. 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. Booster pump 2 HP, 3 phase ODP motor.

    *Note: Model ...

    2HP 230/460V ODP Learn More
    Add to Wish List Add to Compare
  9. barmesa iC1 high head centrifugal pump 5hp

    Barmesa Pumps

    5HP High Pressure Pump

    62070515
    $1,991.00

    5HP High head, End-Suction Centrifugal Pump. 

    Commercial duty pumps featuring all cast iron construction. High pressure / head pump for irrigation.

    Applications

    • Booster systems
    • Water Transfer
    • Chilled Water System
    • High pressure at moderate ...
    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  10. Barmesa 62071008 IB1.5-7-5-2 Center Line Discharge

    Barmesa Pumps

    IB1.5-7-5-2 Center Line Discharge

    62071008
    $2,291.00

    High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

    7.5HP 230/460v/3 Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 321

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. PRICE $ $1,600.00 - $2,199.99 Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 295 items
  2. Magnetic Coupled (Seal-less) Pumps 25 items
Phase (Ø)
  1. Single (1) 142 items
  2. Three (3) 143 items
Voltage (Range)
  1. 110-120 5 items
  2. 208-230/460//190-220/380-415 3 items
  3. 208-240 2 items
  4. 220-240/460-480 81 items
  5. 110-120/220-240 100 items
  6. 220-240 35 items
  7. 208-240/460 56 items
  8. 230/460 1 item
  9. 460-480 1 item
  10. 12/24/36 VDC 4 items
Horse Power (HP)
  1. 1/3 7 items
  2. 1/2 24 items
  3. 2/3 1 item
  4. 3/4 45 items
  5. 1 37 items
  6. 1 1/2 37 items
  7. 2 47 items
  8. 2 1/2 14 items
  9. 3 47 items
  10. 5 18 items
  11. 5 1/2 5 items
  12. 7 3 items
  13. 7 1/2 10 items
  14. 8 4 items
  15. 10 2 items
inlet size
  1. Less than 1" 26 items
  2. 1" 35 items
  3. 1 ¼" 48 items
  4. 1 ½" 78 items
  5. 2" 72 items
  6. 2 ½" 6 items
  7. 3" 16 items
  8. 4" 1 item
PRICE $
$  -  $
Motor
  1. Air-Pneumatic 2 items
  2. ChemDuty 3 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 22 items
  4. EXP (C 1, Gp C/D) 14 items
  5. EXP (C 1, Gp D) 2 items
  6. Gas Engine 16 items
  7. Hermetically Sealed 4 items
  8. Hydraulic Motor 2 items
  9. ODP 118 items
  10. PTO 2 items
  11. TEFC 122 items
  12. TENV 4 items