 |
Pacer Pump is manufacturer of high performance centrifugal pumps. Pacer pumps for dewatering, agriculture, aquaculture, fire, industrial chemicals, wastewater and water, construction and marine usage has resulted in worldwide market acceptance. Most pumps are self priming. Pacer is a registered trademark or service filtration corporation. Pacer Pump Parts. Pacer also makes manual hand pump for drums. Made in PA. Other dewatering pumps: Barnes dewatering pumps electric. Tsurumi dewatering pumps. |
Categories
within Pacer Pump
 |
 |
 |
 |
 |
 |
 |
 |
||||||
2HP Pedestal Mounted Pump
Manufacturer: Pacer Pump
Model Number: 60-12C4-P PCE2CLCSS
Maximum Flow : 120 gallons/min
TDH (Head) Maximum @ 0GPM : 30 PSI
Head (TDH) Maximum @ 0GPM : 70 FT
GPM of Water @ 20 Ft. of Head : 100
GPM of Water @ 30 Ft. of Head : 80
GPM of Water @ 40 Ft. of Head : 60
GPM of Water @ 50 Ft. of Head : 40
GPM of Water @ 60 Ft. of Head : 20
HP Required : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet : 2 "
Wetted Materials : PPO-Noryl
Wetted Materials : SS-Plastic
Elastomers : EPDM
Motor : PTO
Speed : 3450/1725 RPM
Max Operating Temp : 200 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.125 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 1 %
Shaft : 316SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : C
Impeller Mat'l / Type : Polyester, semi-open
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Fountain
Applications : Pond
PH High : 7 pH
Other : Pump is molded of glass reinfo
Country of Origin : USA
Duty : Continuous
Drain Plug : yes
Port Rotation : yes
Shaft Size : 0.75 inch
| Read more… |
$44600
ea.
|
230/460v/3 2 HP
Manufacturer: Pacer Pump
Model Number: 60-12C4-D2.0C
Maximum Flow : 120 gallons/min
TDH (Head) Maximum @ 0GPM : 30 PSI
Head (TDH) Maximum @ 0GPM : 70 FT
GPM of Water @ 20 Ft. of Head : 100
GPM of Water @ 30 Ft. of Head : 80
GPM of Water @ 40 Ft. of Head : 60
GPM of Water @ 50 Ft. of Head : 40
GPM of Water @ 60 Ft. of Head : 20
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet : 2 "
Wetted Materials : PPO-Noryl
Wetted Materials : SS-Plastic
Elastomers : EPDM
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : TEFC
Speed : 3450 RPM
MTR Cord Length : 0 FT
Max Operating Temp : 200 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.125 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 1 %
Shaft : 316SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. (see curve image) : C
Impeller Mat'l / Type : Polyester, semi-open
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Fountain
Applications : Pond
PH High : 7 pH
Other : Pump is molded of glass reinfo
Country of Origin : USA
Duty : Continuous
Drain Plug : yes
Port Rotation : yes
| Read more… |
Sale Price
|
$88270
ea.
|
Manufacturer: Pacer Pump
Model Number: 58-13L2-D5.0C
Maximum Flow : 280 gallons/min
Minimum Flow : 10 gallons/min
TDH (Head) Maximum @ 0GPM : 32.47 PSI
Head (TDH) Maximum @ 0GPM : 75 FT
TDH Minimum : 10
Head @ BEP : 43 FT
Head @ BEP PSI : 18.61 psi
HP Required : 4.2 HP
HP Standard : 5 HP
Inlet Connection Type : FNPT
Inlet : 3 "
Outlet Connection Type : FNPT
Outlet : 3 "
Wetted Materials : Polyester
Wetted Materials : 304SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : TEFC
Speed : 3450 RPM
Motor Frame : 182/4TC
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.6 "
Max Specific Gravity : 1.4 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : Sleeved CS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : F
Applications : Chemical
Applications : Dewatering
Applications : Flooded Suction
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 9 pH
Other : Pump and motor are assembled a
| Read more… |
$120200
ea.
|
Manufacturer: Pacer Pump
Model Number: 58-11P4-E3CP
Maximum Flow : 140 gallons/min
TDH (Head) Maximum @ 0GPM : 45.45 PSI
Head (TDH) Maximum @ 0GPM : 105 FT
TDH Minimum : 15
Head @ BEP : 45 FT
Head @ BEP PSI : 19.48 psi
HP Standard : 3.5 HP
Watts : 0 W
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : PolyPro-GF
Wetted Materials : 304SS
Elastomers : EPDM
Motor : Gas Engine
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.6 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : Sleeved CS
Mechanical Seal : 6A
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : P
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Chemical
Applications : Fire
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Portable
Applications : Self-Priming
Applications : Sump
Applications : Contractor
Applications : Dredging
Applications : Slurry, Slush & Sludge
Applications : Dewatering
PH High : 9 pH
Other : SS fasteners. Not for use with
| Read more… |
$52200
ea.
|
5.5 HP Briggs gas engine
Manufacturer: Pacer Pump
Model Number: 58-52W4-E5ICP
Maximum Flow : 180 gallons/min
TDH (Head) Maximum @ 0GPM : 33 PSI
Head (TDH) Maximum @ 0GPM : 76 FT
GPM of Water @ 20 Ft. of Head : 160
GPM of Water @ 40 Ft. of Head : 125
GPM of Water @ 60 Ft. of Head : 60
HP Standard : 5.5 HP
Inlet Connection Type : MNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : 304SS
Wetted Materials : Polyester
Elastomers : EPDM
Motor : Gas Engine
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 130 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.1 "
Max Specific Gravity : 1.8 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller Mat'l / Type : FRP, semi-open
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Marine
Applications : Pond
Applications : Self-Priming
PH High : 7 pH
Other : Connections are dual 2" outsid
Country of Origin : USA
Duty : Continuous
Drain Plug : yes
| Read more… |
$116800
ea.
|
Pump with roll cage
Manufacturer: Pacer Pump
Model Number: 58-12BUL Fire Kit
Maximum Flow : 200 gallons/min
TDH (Head) Maximum @ 0GPM : 56 PSI
Head (TDH) Maximum @ 0GPM : 130 FT
HP Standard : 5.5 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : 304SS
Wetted Materials : Polyester
Elastomers : Buna-Nitrile
Motor : Gas Engine
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.6 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : U
Impeller Mat'l / Type : Plastic, semi-open
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Contractor
Applications : Dewatering
Applications : Fire
Applications : Irrigation
Applications : Mud
Applications : Pond
Applications : Portable
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 8 pH
Other : 3/4" motor shaft diameter.
Country of Origin : USA
Duty : Continuous
Drain Plug : yes
| Read more… |
$79090
ea.
|
Manufacturer: Pacer Pump
Model Number: SE2HL-C3.0C
Maximum Flow : 200 gallons/min
TDH (Head) Maximum @ 0GPM : 38.96 PSI
Head (TDH) Maximum @ 0GPM : 90 FT
HP Standard : 3 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : SS-Plastic
Elastomers : EPDM
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 6/13 A
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Max. Volume of Suspended Solids : 0 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Warranty : 1 Year/s
Applications : Dewatering
Applications : Self-Priming
PH High : 7 pH
| Read more… |
$113100
ea.
|
Manufacturer: Pacer Pump
Model Number: 58-12I4 HYC
Maximum Flow : 230 gallons/min
TDH (Head) Maximum @ 0GPM : 51.95 PSI
Head (TDH) Maximum @ 0GPM : 120 FT
TDH Minimum : 46
Head @ BEP : 55 FT
Head @ BEP PSI : 23.81 psi
HP Required : 6.6 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : Polyester
Wetted Materials : 304SS
Elastomers : EPDM
Motor : Hydraulic Motor
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.6 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 15 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : I
Applications : Contractor
Applications : Dewatering
Applications : Fire
Applications : Flooded Suction
Applications : Marine
Applications : Mud
Applications : Pond
Applications : Portable
Applications : Self-Priming
Applications : Sewage
Applications : Sump
PH High : 8 pH
Other : Not for use with plating solut
| Read more… |
$70180
ea.
|
Manufacturer: Pacer Pump
Model Number: 58-11E3HYC
Maximum Flow : 110 gallons/min
TDH (Head) Maximum @ 0GPM : 31 PSI
Head (TDH) Maximum @ 0GPM : 71 FT
TDH Minimum : 46
HP Required : 1.7 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : 304SS
Wetted Materials : Polyester
Elastomers : Buna-Nitrile
Motor : Hydraulic Motor
Speed : 3450 RPM
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.6 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 10 %
Shaft : 304SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. (see curve image) : E
Impeller Mat'l / Type : Polyester, semi-open
Rotation : CW facing motor side Drive End
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Contractor
Applications : Dewatering
Applications : Fire
Applications : Irrigation
Applications : Mud
Applications : Pond
Applications : Portable
Applications : Self-Priming
Applications : Sewage
Applications : Slurry, Slush & Sludge
Applications : Sump
PH High : 8 pH
Other : <table width="60%" border="1"
Country of Origin : USA
Duty : continuous
Drain Plug : yes
| Read more… |
$63800
ea.
|
|
|
|
|
|
|
|
|
||||||