Centrifugal pump is often thought of as the simplest and most widely used of all the various pump types. A centrifugal pump has a rotating impeller, within a casing, which imparts radial velocity to the liquid, which then exits the pump by way of the discharge nozzle. The flow is smooth and will change according to the system backpressure.
Centrifugal pumps:
Sizes from 1 GPM to 100’s GPM.
Are made in materials from CI to Titanium and CPVC, PP, PVDF and many others.
Produce moderate pressures 1 PSI to 100’s PSI.
Can handle liquids that are less viscous than water, up to 300 SSU on a practical basis.
Some can handle suspended solids.
Not inherently self-priming, can be adapted to be.
Applications such as chemical transfer, wastewater, slurries, plating solutions, cooling systems, where a smooth, consistent flow rate is need.
 |
 |
 |
 |
 |
 |
 |
 |
||||||
2HP 208-230/460v
Manufacturer: Sta-rite Water Pumps
Model Number: DHG3 Sprinkler pump
Maximum Flow : 90 gallons/min
TDH (Head) Maximum @ 0GPM : 58 PSI
Head (TDH) Maximum @ 0GPM : 135 FT
HP Standard : 2 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 2 "
Wetted Materials : CI
Wetted Materials : Noryl-PPO
Elastomers : Buna-Nitrile
Voltage : 208-230/460 V
Phase : 3
Frequency : 60 Hz
Motor : ODP
Speed : 3450 RPM
Motor Frame : 182/4JM
Length : 18.7 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 25 FT
Max Operating Temp : 120 °F
Viscosity : Water 1.00 cp 31.00 ssu
Max. Particle Size : 0.12 "
Max Specific Gravity : 1 sp. gr.
Max. Particle Hardness : 4 MOH
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : ball
Impeller Mat'l / Type : Noryl
Warranty : 1 Year/s
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Self-Priming
PH High : 7 pH
Other : Order suction flange and baske
Approvals : US-CSA
Country of Origin : USA
Duty : Continuous
Drain Plug : yes
| Read more… |
$98200
ea.
|
115/230v 1-1/2HP ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 3690-95 Centrifugal pump
Maximum Flow : 90 gallons/min
TDH (Head) Maximum @ 0GPM : 28.57 PSI
Head (TDH) Maximum @ 0GPM : 66 FT
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1 "
Wetted Materials : CI-SS
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 22 / 11 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 13.3 "
MTR Cord Length : 0 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.13 "
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Mechanical Seal : Type6
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : H
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Applications : Flooded Suction
Applications : Chemical
Applications : Coolant
Applications : Cooling
Applications : Constant Pressure
Applications : Dewatering
Applications : Fuel Oil
PH High : 8 pH
Other : see curve H
Country of Origin : USA, Buy American
Drain Plug : Yes
Port Rotation : 4 x 90
| Read more… |
$38300
ea.
|
115/230v 1-1/2HP ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2821-95 Self-priming
Maximum Flow : 100 gallons/min
TDH (Head) Maximum @ 0GPM : 42.42 PSI
Head (TDH) Maximum @ 0GPM : 98 FT
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 22/11 A
Speed : 3450 RPM
Motor Frame : 56J thrd
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Vegetable Oil 34.60 cp 200.00
Max. Particle Size : 0.37 "
Max. Volume of Suspended Solids : 0 %
Shaft : 416SS
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : E
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Warranty : 1 Year/s
Applications : Dewatering
Applications : Self-Priming
PH High : 7 pH
Country of Origin : USA, Born in America
Drain Plug : Yes
| Read more… |
$53500
ea.
|
230/460v 3HP TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 315B-95
Maximum Flow : 160 gallons/min
Best Efficiency GPM @ Head (Ft.) : 110@55
TDH (Head) Maximum @ 0GPM : 34.63 PSI
Head (TDH) Maximum @ 0GPM : 80 FT
HP Standard : 3 HP
Inlet Connection Type : FNPT
Inlet : 2 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : CI-SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Motor : TEFC
Motor Amps : 8 / 4 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 11.1 "
MTR Cord Length : 0 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Particle Size : 0.1 "
Max Specific Gravity : 1.2 sp. gr.
Max. Particle Hardness : 6 MOH
Max. Volume of Suspended Solids : 5 %
Shaft : 316SS
Mechanical Seal : Type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : G
Impeller Mat'l / Type : Stainless Steel, semi-open
Rotation : CCW pump end Drive End
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Boiler Feed
Applications : Chemical
Applications : Coolant
Applications : Cooling
PH High : 9 pH
Country of Origin : USA - Buy American
Duty : Continuous
Drain Plug : yes, at all positions
Port Rotation : 4 positions in 90 degree increments. Discharge should never point down due to air entrainment.
| Read more… |
$73400
ea.
|
115/230v 3/4HP ODP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 4895-98
Maximum Flow : 53 gallons/min
TDH (Head) Maximum @ 0GPM : 38.96 PSI
Head (TDH) Maximum @ 0GPM : 90 FT
HP Required : 0.75 HP
HP Standard : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1 "
Wetted Materials : 316SS
Elastomers : Viton
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : ODP
Motor Amps : 13 / 7 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 15.7 "
MTR Cord Length : 0 FT
Max Operating Temp : 200 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max Specific Gravity : 1 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 0 %
Mechanical Seal : type 21
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : B
Impeller Mat'l / Type : Stainless Steel, Closed
Warranty : 1 Year/s
Applications : Chemical
Applications : Coolant
Applications : Cooling
Applications : Fire
Applications : High Pressure
Applications : Irrigation
Applications : Water Blast
PH High : 7 pH
Country of Origin : USA, Born in America
Duty : Continuous
Drain Plug : Yes
Port Rotation : 4 x 90
| Read more… |
$74500
ea.
|
230/460v 3/4HP TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 489D-95
Maximum Flow : 42 gallons/min
TDH (Head) Maximum @ 0GPM : 34.63 PSI
Head (TDH) Maximum @ 0GPM : 80 FT
HP Required : 0.75 HP
HP Standard : 0.75 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1 "
Wetted Materials : CI
Wetted Materials : 316SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 3 / 2 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 14.2 "
MTR Cord Length : 0 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : A
Impeller Mat'l / Type : Stainless Steel, Closed
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Cooling
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
PH High : 8 pH
Country of Origin : USA, Buy American
Duty : Continuous
Drain Plug : Yes
Port Rotation : 4 x 90
| Read more… |
$49800
ea.
|
230/460v 1-1/2HP
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 3893-98
Maximum Flow : 70 gallons/min
TDH (Head) Maximum @ 0GPM : 22.51 PSI
Head (TDH) Maximum @ 0GPM : 52 FT
HP Required : 1.5 HP
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.5 "
Outlet Connection Type : FNPT
Outlet : 1.5 "
Wetted Materials : 316SS
Elastomers : Teflon-PTFE
Voltage : 230/460 V
Phase : 3
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 3 / 2 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 14.5 "
Self Priming : 1
Suction Lift : 6 FT
Max Operating Temp : 200 °F
Viscosity : Cream 16.50 cp 100.00 ssu
Max. Particle Size : 0.1 "
Max Specific Gravity : 1.3 sp. gr.
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 1 %
Shaft : 416SS
Mechanical Seal : Type 9
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Impeller No. : B
Impeller Mat'l / Type : Stainless Steel, Semi-Open
Applications : Flooded Suction
Applications : Chemical
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Machine Tool
Applications : Marine
Applications : Parts Washer
Applications : Pond
Applications : Self-Priming
PH High : 7 pH
Other : SS impeller.
Country of Origin : USA, Born in America
| Read more… |
$108500
ea.
|
5HP, 230/460v, TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2875-95 electric self priming pump
Maximum Flow : 305 gallons/min
TDH (Head) Maximum @ 0GPM : 38.96 PSI
Head (TDH) Maximum @ 0GPM : 90 FT
HP Standard : 5 HP
Inlet Connection Type : FNPT
Inlet : 3 "
Outlet Connection Type : FNPT
Outlet : 3 "
Wetted Materials : CI-SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Motor Amps : 17 / 9 A
Speed : 3450 RPM
Motor Frame : 182/4JM
Length : 27.5 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Water 1.00 cp 31.00 ssu
Max. Particle Size : 0.38 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 10 %
Shaft : 416SS
Coupling : N
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : B
Impeller Mat'l / Type : Stainless Steel, semi-open
Rotation : CW facing motor side of pump Drive End
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Contractor
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Self-Priming
PH High : 8 pH
Country of Origin : USA, Buy American
Duty : Continuous
Drain Plug : Yes
| Read more… |
$122000
ea.
|
115/230v 1-1/2HP TEFC
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 489A-95
Maximum Flow : 60 gallons/min
TDH (Head) Maximum @ 0GPM : 47.62 PSI
Head (TDH) Maximum @ 0GPM : 110 FT
HP Required : 1.5 HP
HP Standard : 1.5 HP
Inlet Connection Type : FNPT
Inlet : 1.25 "
Outlet Connection Type : FNPT
Outlet : 1 "
Wetted Materials : CI
Wetted Materials : 316SS
Elastomers : Buna-Nitrile
Voltage : 115/230 V
Phase : 1
Frequency : 60 Hz
Motor : TEFC
Motor Amps : 18 / 9 A
Speed : 3450 RPM
Motor Frame : 56J thrd
Length : 16.1 "
MTR Cord Length : 0 FT
Max Operating Temp : 180 °F
Viscosity : Milk 3.20 cp 40.00 ssu
Max. Volume of Suspended Solids : 5 %
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : C
Impeller Mat'l / Type : Stainless Steel, Closed
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Cooling
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Parts Washer
PH High : 8 pH
Country of Origin : USA, Buy American
Duty : Continuous
Drain Plug : Yes
Port Rotation : 4 x 90
| Read more… |
$52500
ea.
|
3HP 230/460v
Manufacturer: AMT Trash Pump Centrifugal Pumps
Model Number: 2874-95 Self-priming pump
Maximum Flow : 250 gallons/min
TDH (Head) Maximum @ 0GPM : 28 PSI
Head (TDH) Maximum @ 0GPM : 65 FT
HP Standard : 3 HP
Inlet Connection Type : FNPT
Inlet : 3 "
Outlet Connection Type : FNPT
Outlet : 3 "
Wetted Materials : CI-SS
Elastomers : Buna-Nitrile
Voltage : 230/460 V
Phase : 3
Frequency : 50/60 Hz
Motor : TEFC
Motor Amps : 8 / 4 A
Speed : 3450 RPM
Motor Frame : 182/4JM
Length : 27.5 "
MTR Cord Length : 0 FT
Self Priming : 1
Suction Lift : 20 FT
Max Operating Temp : 180 °F
Viscosity : Water 1.00 cp 31.00 ssu
Max. Particle Size : 0.38 "
Max. Particle Hardness : 5 MOH
Max. Volume of Suspended Solids : 2 %
Shaft : 416SS
Coupling : N
Mechanical Seal Face : Carbon-ceramic
Mechanical Seal Type : Single
Motor Bearings : Ball
Impeller No. : C
Impeller Mat'l / Type : Stainless Steel, Semi-open
Rotation : CW facing motor side of pump Drive End
Warranty : 1 Year/s
Applications : Flooded Suction
Applications : Dewatering
Applications : Fountain
Applications : Irrigation
Applications : Pond
Applications : Self-Priming
PH High : 8 pH
Country of Origin : USA, Buy American
Duty : Continuous
Drain Plug : Yes
| Read more… |
$101000
ea.
|