| Product Name: | Trash Pump 3" Honda GX240 Gas |
| Model Number: | KTH-80X |
| Manufacturer: | Koshin Pumps Dewatering High Pressure & Generators |
Trash Pump 3 Inch, Honda
GX240 7HP engine. USDA Forest Service approved spark arrester. Koshin makes the same pump under the WT30 model, exact same.Features • The cleanout cover and volute can be easily removed in seconds for easy cleaning of debris. • The seal is the heart of the pump. Silicon Carbide seals, developed exclusively for Koshin, vastly increase the durability of the mechanical seal and protect engine shaft. Silicon carbide SiC seals are 2 times harder, 15% tougher, and 50% stronger than common ceramic seals. • Impeller is Hi-chrome cast iron. Volute manufactured from Spheroidal Graphite (ductile) cast iron. These materials employed to ensure long life and low maintenance. No wear-out plates. • Sturdy steel wrap-around pipe frame protects entire unit. • Rubber mountings minimize vibration. • Honda OHV engine with oil alert, and electronic ignition provides reliability and low fuel consumption. • All aluminum die cast pump housing for light weight and portability. • 1.6 Gal. fuel tank provides up to 2 Hrs run time.
Order
Trash Pump with HondaDo not be fooled by imitation "industrial" pumps sold elsewhere. The pump quality is not the same and as with any pump parts will be needed and PumpBiz stocks parts to all the pumps we sell and support. These are the same pumps used by many rental stores, so they have proven themselves many times over.
|
Rating: 
|
|
|
Usual Ship Time: Call Pumpbiz |
|
Regular Price: $1,579.00 Your Price: $1,421.00 EA You Save: $158.00 (10%) |
 |
| Get them while they last at this price |
| Maximum Flow | |
354 gallons/min |
| TDH (Head) Maximum @ 0GPM | |
38 PSI |
| Head (TDH) Maximum @ 0GPM | |
89 FT |
| GPM of Water @ 20 Ft. of Head | |
320 |
| GPM of Water @ 40 Ft. of Head | |
275 |
| GPM of Water @ 60 Ft. of Head | |
180 |
| GPM of Water @ 70 Ft. of Head | |
110 |
| HP Standard | |
7.1 HP |
| Inlet Connection Type | |
MNPT |
| Inlet | |
3 " |
| Outlet Connection Type | |
MNPT |
| Outlet | |
3 " |
| Wetted Materials | |
Aluminum |
|
Ductile Iron | |
| Elastomers | |
Buna-Nitrile |
| Motor | |
Gas Engine |
| Speed | |
3450 RPM |
| Length | |
27 " |
| Self Priming | |
Yes |
| Suction Lift | |
26 FT |
| Max Operating Temp | |
120 °F |
| Viscosity | |
Vegetable Oil 34.60 cp 200.00 ssu |
| Max. Particle Size | |
1.2 " |
| Max Specific Gravity | |
1.2 sp. gr. |
| Max. Particle Hardness | |
5 MOH |
| Max. Volume of Suspended Solids | |
25 % |
| Mechanical Seal | |
Silicon Carbide |
| Mechanical Seal Face | |
SiC |
| Mechanical Seal Type | |
Single |
| Impeller Mat'l / Type | |
Hi-Chrome cast iron, non-clog |
| Warranty | |
2 Year/s |
| Applications | |
Contractor |
|
Dewatering | |
|
Self-Priming | |
| PH High | |
7 pH |
| Other | |
Includes suction strainer, sturdy wrap-around steel pipe frame. Parts are exact same and interchangable with Honda WT30 pumps. Priming Time 100 sec. at 16.4 ft. |
| Low Oil Shutdown | |
Yes |
| Country of Origin | |
Japan |
| Duty | |
Continuous |
| Drain Plug | |
yes |
| Weight | |
128 lbs |
