| Product Name: | Booster pump with flow switch |
| Model Number: | BF1430 Davey booster pump |
| Manufacturer: | Davey Water pump |
Incorperated flow switch turns pump on automatically at 1.2 gpm and off if flow is less than .7 gpm. Every pump is performance and pressure tested in our factory to ensure quality and reliability. SS pump casing for long life. Priming port can also be used for gage fitting for easy operation. Proven, robust pump design for long life. Davey manufactured motor with IP56- TEFC, motor is corrosion resistant for long term protection against vermin, dust and water. Motor and pump are designed for frequent starts providing a long and reliable working life.
Built-in thermal overload protection with manual reset in all single phase models for long term motor protection. Double contact seal, C3, high temperature greased bearings for long life and smooth running. 6ft, 15amp rated power cord fitted to all single phase models.Corrosion resistant motor mounting feet for long life
APPLICATIONS
• Water supply
• Water transfer
• Hosing down - dairies, factory floors
etc.
• Tank filling
• Sprinkler supply
• Garden reticulation
Boosts incoming pressure 35 PSI (at 5 GPM). max operating 120 psi . Float switch P/N is 400572 and price is $199.00
|
Rating: 
|
|
|
Usual Ship Time: 2-3 days |
|
Your Price: $670.00 EA |
 |
| Maximum Flow | |
25 gallons/min |
| Minimum Flow | |
1.5 gallons/min |
| TDH (Head) Maximum @ 0GPM | |
36.8 PSI |
| Head (TDH) Maximum @ 0GPM | |
85 FT |
| HP Standard | |
0.75 HP |
| Watts | |
830 W |
| Inlet Connection Type | |
FNPT |
| Inlet | |
1.25 " |
| Outlet Connection Type | |
FNPT |
| Outlet | |
1 " |
| Wetted Materials | |
304SS |
| Elastomers | |
Buna-Nitrile |
| Voltage | |
115 V |
| Phase | |
1 |
| Frequency | |
60 Hz |
| Motor | |
TEFC |
| Motor Amps | |
6.9 A |
| Speed | |
3450 RPM |
| Max Operating Temp | |
120 °F |
| Viscosity | |
Water 1.00 cp 31.00 ssu |
| Max. Volume of Suspended Solids | |
0 % |
| Mechanical Seal Face | |
Carbon-ceramic |
| Mechanical Seal Type | |
Single |
| Warranty | |
1 Year/s |
| Applications | |
Flooded Suction |
|
Irrigation | |
| PH High | |
7 pH |
| Other | |
booster system gives you the ultimate in strong, even water pressure. The flow sensor starts the pump as soon as you switch on the tap and continues running until water is not required. The flow sensor continuously monitors the flow of water and will switch it off to avoid damage if the supply becomes inadequate. Great for boosting showers or entire homes. |
| Weight | |
26 lbs |
