|Product Name:||Epoxy Pump Pedestal|
For pumphead only models (30510-3xxx) select NEMA H156C Frame C-Face motor rated at 3/4 HP at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Ball bearing locked against axial movement is recommended. Motor must deliver 1.5 ft-lbs and 4.3 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.
For pedestal mount models (30510-1xxx) operating at 1750 RPM, select 3/4 HP or 1 1/2 HP motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 3 ft-lbs or 6.9 ft-lbs. of torque minimum for forward and reverse operation respectively.
Usual Ship Time: 2-3 days
Your Price: $1,012.80 EA
|Maximum Flow||8 gallons/min|
|TDH (Head) Maximum @ 0GPM||12.99 PSI|
|Head (TDH) Maximum @ 0GPM||30 FT|
|HP Standard||0.75 HP|
|Max Operating Temp||180 °F|
|Max. Volume of Suspended Solids||0 %|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Double|
|PH High||7 pH|