| Product Name: | Conv Jet Pump 1/2HP |
| Model Number: | PLC PKG 1-8AP |
| Manufacturer: | Sta-rite Water Pumps |
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.
Superior Rustproof Construction - Pump body is Dura-Glas® fiberglass reinforced
thermoplastic - lightweight, rustproof and exceptionally strong. All components
in contact with water are resistant to the corrosive and abrasive forces found
in the most aggressive water conditions.
Heavy-duty Motor - Dustproof canopy completely encloses electrical components
and provides dust, dirt and insect protection. Ventilating air cannot contaminate
vital switching components. Permanently lubricated, heavy-duty ball bearings
ensure smooth, quiet operation and extended motor life.
Precision Diffuser - Multi-port, reinforced polypropylene design primes faster
and handles more air.
Precision Molded Impeller - Precision molded Noryl® gives perfect balance
and ultra-smoothness for highest performance and efficiency.
FEATURES
- Dual-voltage, 115/230-volt
- Fiberglass-reinforced composite pump body - lightweight, corrosion resistant and exceptionally strong
- 1st in class performance
- built in pressure regulator - adjustable for best performance
- pressure gauge included
- suction over deep-well jet design
- Composite bolt-on shallow well jet packages -sold separately
- single and double -pipe jet packages - sold separately
- Powered by A. O. Smith, 2-compartment, square flange motor, thermal overload protected
- Corrosion resistant composite pump base
- Easily serviceable
- UL 778 in-door/out-door, CSA Listed
- UL Classified to ANSI/NSF Standard 61
- Well depths up to 110 Feet
|
Rating: 
|
|
|
Usual Ship Time: 2-3 days |
|
Your Price: $482.00 EA |
 |
| Maximum Flow | |
3.8 gallons/min |
| TDH (Head) Maximum @ 0GPM | |
71.86 PSI |
| Head (TDH) Maximum @ 0GPM | |
166 FT |
| HP Standard | |
0.5 HP |
| Inlet Connection Type | |
FNPT |
| Inlet | |
1.25 " |
| Outlet Connection Type | |
FNPT |
| Outlet | |
1.25 " |
| Wetted Materials | |
Polyester |
| Elastomers | |
Buna-Nitrile |
| Voltage | |
115/230 V |
| Phase | |
1 |
| Frequency | |
60 Hz |
| Motor | |
ODP |
| Motor Frame | |
48 |
| Viscosity | |
Water 1.00 cp 31.00 ssu |
| Max. Volume of Suspended Solids | |
0 % |
| Mechanical Seal Type | |
Double |
| PH High | |
7 pH |
| Other | |
 |
| Weight | |
27 lbs |
