|Product Name:||3/4" Bronze gear pump 1HP|
These pumps are suitable for all liquids that are compatible with bronze. Most common liquids are water, oil, and mild chemicals in the pH-range of 4 to 11. Viscous liquids require reduced shaft speeds of 1150 RPM or lower.
Liquids containing solids, abrasives, powders or paint pigments are definitely not recommended for gear pumps. If abrasives are unavoidable, use a very low shaft speed. The recommended liquid temperature range is 32oF to 140oF for longest pump life. If more extreme temperature conditions exist, our factory should be consulted. Freezing of water-filled pumps can cause damage and must be avoided. Oils at low temperatures are very viscous requiring a lower speed or extra power.
As a general rule, the suction lift should be kept at an absolute minimum by placing the pump as close to the liquid source as possible. A gear pump in new condition can lift 20 feet of water in the suction line. A foot valve (preferably with built-in strainer) is recommended at the beginning of the suction line. For a first start-up, the pump should be primed to avoid dry running. Minimum size of the suction pipe is the size of the pump inlet port. For longer suction lines (over 3 feet), or for viscous liquids, the pipe size should be at least one size or two sizes larger than the pump inlet port.
Usual Ship Time: 2-3 days
Your Price: $1,170.00 EA
|Maximum Flow||19 gallons/min|
|TDH (Head) Maximum @ 0GPM||20 PSI|
|Head (TDH) Maximum @ 0GPM||46 FT|
|HP Standard||1 HP|
|Inlet Connection Type||FNPT|
|Outlet Connection Type||FNPT|
|Suction Lift||20 FT|
|Max Operating Temp||140 °F|
|Viscosity||Glycerine 880.00 cp 5000.00 ssu|
|Max. Particle Size||0 "|
|Max. Particle Hardness||1 MOH|
|Max. Volume of Suspended Solids||0 %|
|Mechanical Seal||Lip seal|
|Mechanical Seal Type||Double|
|PH High||11 pH|
|Other||Clockwise rotation from pump end.|