Product Name: 30520 SS 0003 Pedestal
Model Number: 30520-0003
Manufacturer: Jabsco Pumps

Use where single or variable speed operation and 316 Stainless Steel material is desirable. Self-priming, 22 gpm flow, and debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM impeller kit 8981-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY.

For pumphead only models (30520-2xxx) select NEMA H145TC Frame C-Face motor rated at 1.5 HP at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 4.8 ft-lbs and 11.2 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.

For pedestal mount models (30520-0xxx) operating at 1750 RPM, select 1.5 HP or 3 HP motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 7.9 ft-lbs or 16.3 ft-lbs. of torque minimum for forward and reverse operation respectively.



Usual Ship Time: 2-3 days

Regular Price:  $2,640.00 
Your Price: $1,430.00 EA
You Save: $1,210.00 (46%)
Maximum Flow 22 gallons/min 
TDH (Head) Maximum @ 0GPM 30.3 PSI 
Head (TDH) Maximum @ 0GPM 70 FT 
HP Required 1.5 HP 
HP Standard 1.5 HP 
Inlet Connection Type FNPT 
Inlet 1 " 
Outlet Connection Type FNPT 
Outlet 1 " 
Wetted Materials 316SS 
Elastomers Buna-Nitrile 
Voltage 115/230 V 
Frequency 60 Hz 
Motor TEFC 
Speed 1725 RPM 
Motor Frame 56 
Self Priming Yes 
Max Operating Temp 180 °F 
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu 
Max. Particle Hardness 5 MOH 
Max. Volume of Suspended Solids 0 % 
Shaft 316SS 
Mechanical Seal Face Carbon-ceramic 
Mechanical Seal Type Single 
Applications Coolant 
PH High 7 pH 
Other Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers. 
Weight 11 lbs
There are no related accessories listed for this item at this time. Please check back again, or Contact Us for more information about this item.
Ask Henry - Interactive Pump Selector
Contact Us:


Hot Buys

Pump News

State of the art Float switches

PumpBiz offers modern Electronic float switches that no longer have problem causing moving parts. Features include alarms, lights,phone calls and alternators. They are easy to install and fit just …

Read More

Propane BI-FUEL upgrade Kit

Trucks, cars, and other vehicles as well as other Small engines running on our propane conversion systems have been proven to have 80% cleaner emissions and help the engine last longer than those …

Read More

Flex Pump™ Dewatering Trash

Submersible Trash pump engine powered*. Flex-Pump is a submersible dewatering pump without electricity. Customers who have used it are so impressed they are calling it a "Muddy …

Read More

© 2000 - 2015 PumpBiz, Inc.  •  PumpBiz offers open accounts  •  All major credit cards accepted & PayPal  •  PumpBiz is a registered trademark of PumpBiz, Inc.