| Product Name: | HB1.5CE5-24"C-CG-140F-D7.5 |
| Model Number: | 41-5024E |
| Manufacturer: | Serfilco |
The series HB Sump Pump features a sleeved stainless steel shaft with bearings and liners which are lubricated with the product being pumped or with clean water from a separate source. A vapor seal between the rotating shaft and the support column protects the motor.
Pumps are designed for use with high & low RPM motors. Liner is made of special fluoride-resistant ceramic which rarely requires replacement. Pump casing may be rotated for a choice of discharge direction and flexibility or installation.
|
Rating: 
|
|
|
Usual Ship Time: 5-7 days |
|
Your Price: $2,919.00 EA |
 |
| Maximum Flow | |
140 gallons/min |
| Minimum Flow | |
5 gallons/min |
| TDH (Head) Maximum @ 0GPM | |
60.61 PSI |
| Head (TDH) Maximum @ 0GPM | |
140 FT |
| TDH Minimum | |
82 |
| Head @ BEP | |
80 FT |
| Head @ BEP PSI | |
34.63 psi |
| HP Required | |
7.5 HP |
| HP Standard | |
7.5 HP |
| Inlet Connection Type | |
FNPT |
| Inlet | |
2 " |
| Outlet Connection Type | |
MNPT |
| Outlet | |
1.5 " |
| Wetted Materials | |
CPVC |
| Elastomers | |
EPDM |
| Voltage | |
208-230/460 V |
| Phase | |
3 |
| Motor | |
ChemDuty |
| Length | |
24 " |
| Self Priming | |
No |
| Max Operating Temp | |
160 °F |
| Viscosity | |
Milk 3.20 cp 40.00 ssu |
| Max Specific Gravity | |
1.2 sp. gr. |
| Max. Particle Hardness | |
5 MOH |
| Max. Volume of Suspended Solids | |
0 % |
| Shaft | |
Sleeved SS |
| Mechanical Seal Face | |
Carbon-ceramic |
| Mechanical Seal Type | |
Double |
| PH High | |
13 pH |
| Weight | |
151 lbs |
There are no related accessories listed for this item at this time. Please check back again, or Contact Us for more information about this item.
