GearIron Gear Pump
GearIron®Cast Iron positive displacement helical gear
pumps, General Duty series G, H is Heavy duty. Flow: 0-35 GPM
(0-132.5 LPM) - Pressure: 0-500. Not for propane. PSI (0 - 34.5
BAR) Performance:Positive displacement. Little flow decrease with
pump pressure increase. Flow increases with speed increase. Power:
Power demand increases with speed and pressure. Suction Lift
(water): 0-20 ft. below pump level (0 - 6.1meters) Liquid
Cleanliness and Viscosity: Close tolerances require clean liquids.
Viscous liquids require lower pump speeds. Liquid Compatibility:
Petroleum products, solvents and fuel oils, soaps, coal tar,
asphalt, sealers, resins,non-corrosive liquids, liquid propane.
Noise: Helical gear design quiet. Discharge Line: Relief valve
necessary if flow is shut off. Temperature: -40 degrees F. to 250
degrees F. (-40degrees C to 122 degrees C) Seal Arrangement:
Mechanical or packing Type: Close coupled & Pedestal
For a description of the various seal arrangements, and bearing selection table click "Outline Drawing" link. The individual pump model pages have the actual "Dimensional Drawing". The Performance curve link here is a chart for all the pump sizes. On the individual pump model pages they contain the flow curve for that size.
Roper® Tuthill® Viking®
Shop By
Now Shopping by
Shopping Options
- PRICE $ $1,226.00 - $1,226.00 Remove This Item
-
Oberdorfer Pumps
18 GPM CI GEAR PUMP & PED
18GB1111S
$1,226.00Medium duty CI gear pump with relief valve and pedistal for long coupling. Mechanical sealed, bronze bearings. CW rotation.b>Features:
- Shafts: Ground and polished steel.
- Helical Gears: For quiet running.
- Housing: Of close grain cast iron. Three...