MY CART 0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

GearIron Gear Pump

GearIron®Cast Iron positive displacement helical gear pumps, General Duty series G, H is Heavy duty. Flow: 0-35 GPM (0-132.5 LPM) - Pressure: 0-500. Not for propane. PSI (0 - 34.5 BAR) Performance:Positive displacement. Little flow decrease with pump pressure increase. Flow increases with speed increase. Power: Power demand increases with speed and pressure. Suction Lift (water): 0-20 ft. below pump level (0 - 6.1meters) Liquid Cleanliness and Viscosity: Close tolerances require clean liquids. Viscous liquids require lower pump speeds. Liquid Compatibility: Petroleum products, solvents and fuel oils, soaps, coal tar, asphalt, sealers, resins,non-corrosive liquids, liquid propane. Noise: Helical gear design quiet. Discharge Line: Relief valve necessary if flow is shut off. Temperature: -40 degrees F. to 250 degrees F. (-40degrees C to 122 degrees C) Seal Arrangement: Mechanical or packing Type: Close coupled & Pedestal

For a description of the various seal arrangements, and bearing selection table click "Outline Drawing" link. The individual pump model pages have the actual "Dimensional Drawing". The Performance curve link here is a chart for all the pump sizes. On the individual pump model pages they contain the flow curve for that size.

Roper® Tuthill® Viking®

GearIron Gear Pump

Set Descending Direction

   

2 Item(s)

  1. Oberdorfer

    10 GPM CI GEAR PUMP & PED

    10GB1111S


    Medium duty CI gear pump with relief valve and pedistal for long
    coupling. Mechanical sealed, bronze bearings. CW rotation.

    b>Features:



    1. Shafts: Ground and polished steel.

    2. Helical Gears: For quiet running.

    3. Housing: Of close grain cast iron. Three...
  2. Oberdorfer

    18 GPM CI GEAR PUMP & PED

    18GB1111S


    Medium duty CI gear pump with relief valve and pedistal for long
    coupling. Mechanical sealed, bronze bearings. CW rotation.

    b>Features:



    1. Shafts: Ground and polished steel.

    2. Helical Gears: For quiet running.

    3. Housing: Of close grain cast iron. Three...
Set Descending Direction

   

2 Item(s)