MY CART 0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

MTH T41 Regenerative Turbine Pump 20gpm

The MTH T41 Series close-coupled and pedestal mounted regenerative turbine pumps represent the most economical, high performance alternative for low flow (1/2 to 22GPM) applications involving moderate to high pressures (heads to 600 feet). Handle entrapped gasses without vapor lock. Also known as jockey pump.Steep Operating Characteristics Near-constant deliveries are maintained over wide variations in load. High shut-off pressure overcomes temporary line resistance.

Standard Motor Close-coupled T41 pumps use standard “C†face motors. Service and replacement motors up to three horsepower are stock items in the U.S. and at MTH.

Self-Adjusting Impeller A hydrodynamic film on each side of the impeller positions it for long life. The impeller exerts no thrust load on bearings. Pump operates equally well in a vertical or horizontal position.

Mechanical Seals Bronze fitted pumps have Buna N elastomers, high temperature carbon, and ceramic seats for best hot water service. Optional seats and materials are also available.

300# Case Working Pressure Rigid structure is designed for maximum casing strength.

100% Tested Every pump is fully tested to verify performance prior to shipment.

Volatile Fluid Handling Turbine impeller handles vapors up to 20% by volume, minimizing the possibility of vapor locks.

â€Oâ€Ring Gaskets “Oâ€ring seals are used throughout the T41 series pumps to assure sealing and ease of service.

Shaft Sleeve Units up to three horsepower have a shaft sleeve under the mechanical seal. Larger units have a 316 stainless steel shaft with an impeller sleeve.

Water Flinger A water flinger provides added protection to ball bearings in the event of seal leakage.

Simple Construction T41 series pumps contain only three major components, allowing for easy service.

End Suction • Top Discharge T41 Series pumps fit into small spaces easily. Discharge can be rotated in 90 degree, 180 degree and 270 degree positions.

Best Efficiency New pump design optimizes efficiency for each size.

Non-Cavitating T41 series pumps may be operated under adverse inlet conditions without audible or measurable cavation.

Low NPSH New inlet design provides superior fluid handling ability at low head inlet conditions.burks aroura 43195K For Cross Reference to Aurora or Burks click here

MTH T41 Regenerative Turbine Pump 20gpm

Set Descending Direction

   

Items 1 to 10 of 27 total

  1. 1
  2. 2
  3. 3
  1. MTH

    Turbine Pump 1HP

    T41EAB


    Mechanically sealed regenerative turbine for low flow high pressure
    applications. Serving a wide variety of markets and industries
    including boiler feed, condensate return, chillers / temperature
    controllers, refrigeration, petroleum, as well as ...
  2. MTH

    Turbine Pump 3/4HP

    T41BSS753TV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  3. MTH

    Turbine Pump 3/4HP

    T41BSS751TV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  4. MTH

    Turbine Pump 1/2HP

    T41BSS051OV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  5. MTH

    Turbine Pump 1/2HP

    T41BAB051OB


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  6. MTH

    Turbine Pump 3/4HP

    T41BSS753EV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  7. MTH

    Turbine Pump 3/4HP

    T41BSS751EV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  8. MTH

    Turbine Pump 1/2HP

    T41BSS053OV


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
  9. MTH

    MTH Turbine Pump 1/2HP

    T41BAB053OB


    MTH pump. Mechanically sealled regenerative turbines for low flow
    high pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum,...
  10. MTH

    Turbine Pump 3/4HP

    T41BAB753TB


    Mechanically sealled regenerative turbines for low flow high
    pressure applications. Serving a wide variety of markets and
    industries including boiler feed, condensate return, chillers /
    temperature controllers, refrigeration, petroleum, as well a...
Set Descending Direction

   

Items 1 to 10 of 27 total

  1. 1
  2. 2
  3. 3