Featuring Franklin Electrics new SubDive 75 constant pressure
controller, our "Premier Pressure" pump series utilizes our
performance proven Survivor Series Pump End with an industry
standard Franklin Electric motor to provide constant pressure
through a wide range of flow demand, including large homes, ground
source heat pumps and sprinkler systems. CP Water SubDrive 75 is UL
recognized for USA and Canada.
Submatic motor pump, submersible pump.
For Water well depths to 680 feet.
Features of Construction:
- Constant Water pressure with a wide range of settings (25 to 80
- Works with small (2g) pressure tanks or larger already in
- 3 phase performance using 1 phase input--more efficient and
- Built-in diagnostics and protection--surge protection,
underload, undervoltage, locked pump, open circuit, short circuit,
- Smart reset technology allows well recovery before restarting
- Water faucets can be installed between wellhead and
HP: 1.5 or 3
Phase: Three Phase
SF: 1.3, SFA 5.9 Amps
Duty rating: Continuous
Use only Franklin Electric 3-Phase motor provided with
Use of this system with any other Franklin Electric motor or
with motors from other manufacturers may result in damage to both
motor and electronics.
Franklin Electric CP Water SubDrive 75:
Input Phase: Single Phase
Input Voltage: 200 to 250V AC
Input frequency: 50/60Hz
Input current (Maximum): 11 Amps RMS
Output Phase (to motor): Three Phase
Output Frequency (to motor): Variable
Location: Indoor use (no freezing conditions);
operation in ambient temperatures up to 104F (40C)
Circuit Breaker: Standard 15 or 20 amp
Weight: 12 lbs., Height 12 inches, Width: 9.75 inches
Pressure Sensor Specifications:
Factory preset: 50psi
Adjustable range: 25 to 80psi
A 10 foot section of cable is provided with the system to
conncet the pressure sensor.