My Cart

Bottom Suction Submersible Pump

115v 1/2HP 2" or 3/4"
Model Number
PXL-65011
$513.70
floor level submersible water pump for low level pumping

Koshin PXL-65011

Low Level Water Pump

Low Level Submersible floor Dewatering Pump 115v Ponstar. Heavy duty floor level dewatering pump. Unique discharge port allows for vertical OR horizontal discharge. No elbow or kinking of hose if horizontal discharge is needed. Unique internal "check valve" keeps the pump wet so that it can re-start pumping in extreme low level conditions compared to comparable pumps. Prime pump through discharge outlet for start up at any water level. Add a PumpBiz level switch for automatic low level operation. Remember that in order to pump so low to the surface the water inlet passage channels are small. Otherwise the pump would loose prime and suck air. Therefore these remarkable floor level pumps are restricted to about 20GPM (1200GPH). Pumps down to the floor. Also can start pumping in less than a inch of water. *SEE IMAGES.

Features:

  • Pump down to floor level, within 0.04" approx. 1/16" after initial water hight of 1/2".
  • Built-in check valve* keeps liquid in pump and hose eliminating any “back-flow” situations.
  • Impeller and casing are manufactured from a blended rubber compound providing maximum wear resistance, up to three times over cast iron.
  • Water is channeled through the outer wall to cool the motor for maximum endurance.
  • It is compact, light-weight, easy to carry and handle.
  • Oil Bathed double Silicon Carbide mechanical seals, in a "oil" filled chamber allows for periods of dry run
  • Liquid paraffin is used in the shaft seal, therefore water will not be contaminated even in the case of oil leakage.
  • The cord is of uni-body construction ensuring excellent water tightness. Includes strain relief.
  • The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor.

Applications:

  • Construction site, excavations, well casings and general dewatering.
  • Utilities, manhole and vault draining.
  • Residential, draining of basements, crawl spaces and swimming pools.
  • Dual size discharge provides either 2" or 3/4" threaded connection.

No need for the maintenance to mop when you have a Koshin Bottom Suction pump. This pump is great for cleaning up areas where water doesn't belong. Flat roofs, parking lots, crawl spaces, basements and more are ideal jobs for this low level pump. Pump does not need to be fully submerged to operate.

More Information
Model Number PXL-65011
Series Submersible Dewatering Pumps Heavy duty
Max Flow (GPM.) 25
Max Flow GPH 1500
TDH Maximum (Ft) 36
TDH Maximum (PSI) 16
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Outlet Connection Type MNPT
Outlet (In.) 2
Wetted Materials SS-Plastic
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Hermetically Sealed
Speed (RPM.) 1725
Max Operating Temperature (F) 104
Viscosity Milk 3.20 cp 40.00 ssu
Shaft 304SS
Mechanical Seal Yes
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor.
Impeller Material Hard rubber, semi-open
Cord Length (Ft.) 20
Duty Continuous
Drain No
Port Rotation Yes
Country of Manufacture Japan
Weight (Lbs) 26.000000
UPC 4971770430709
Warranty (YRS.) 3
>

Koshin pumps are the standard and known world wide in the contractor, rental, and portable pump markets as the brand to use. Most portable water pumps by Koshin feature Honda gas engines. Koshin manufactures a complete line of self priming centrifugal pumps for general transfer, high pressure and trash debris filled liquids. These pumps come in gas or diesel engine and single phase electric submersibles. Koshin is the most copied pump design coming out of China, but do not think they are the same. Use only the best, the original Koshin.

For over 70 years Koshin has continued to invest in new product testing and development. Koshin totally redesigned its production facilities in 2013 adding in house aluminum die casting, production automation, and state of the art process flow management. With a core philosophy of customer satisfaction, Koshin insures that each product off of its production line is of the finest quality. This is why we can proudly say that the performance specification found in this catalog are guaranteed minimum. This is often not the case with our competitors, who inflate actual performance values.

To further insure our valued customers that Koshin stands by our produces, we offer a 3 year limited warranty against manufactured defects. Our pumps are used and loved in 160 all over the world.

Koshin… the world’s toughest pump.