FMIG40-27K pump Semi Trash
-
Model Number:
90281227
-
Product Name:FMIG40-27K pump Semi Trash
-
Manufacturer:
-
Series (2 Models):
Franklin 90281227
Heavy duty self priming pump of all iron construction. High pressure semi-trash pump for irrigation, marine, pile driving, hydroseeding, directional boring, industrial and de-watering. Engine has Low oil shut off, 7.5 qt. fuel tank gas engine. FMIG40
IMPELLER # 305456015- Semi open Cast iron, non clogging, designed for water but can also handle small quantities of mud, sand, or silt up to 10% by volume
PRIMING PLUG- Enables priming, without having to disconnect the discharge piping
CHECK VALVE- Built in with threaded NPT Suction inlet, prevents Siphoning, facilitates priming.
SEAL- FKM and stainless steel with SiC ceramic faces , mechanical self lubricated, no maintenance required. Hard, siliconized graphite seal faces stand up to abrasive material found in construction and drainage applications.
CASING- Cast gray iron rugged construction large capacity for faster priming. Self Cleaning interior design prevents silt build up.
WEAR PLATE # 305455009- Replaceable steel wear plate, for maximum pump efficiency
- ENGINE TYPE- Kohler
- Starter- Electric
- Low Oil Shut Off- Yes
- Size 4" X 4"
The MIG series has been widely used in the hydro seeding industry because of its ability to pump volume of solids at high pressure. Ditch Witch, Vermeer and others. 4hgg4 MIG4027K
Model Number | 90281227 |
---|---|
Series | High Pressure Trash Pump |
Max Flow (GPM.) | 404 |
Max Flow GPH | 24240 |
TDH Maximum (Ft) | 189 |
TDH Maximum (PSI) | 82 |
Horsepower (IE .5, 1, 1.5, 20) | 27.0000 |
Inlet Connection Type | FNPT |
Inlet (In.) | 4 |
Outlet Connection Type | FNPT |
Outlet (In.) | 4 |
Wetted Materials | Cast Iron, Steel |
Elastomers / O-ring | FKM |
Motor | Gas Engine |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Suction Lift (FT.) | 20 |
Max Operating Temperature (F) | 140 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Mechanical Seal | No |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Rotation | clockwise viewed from engine side |
Impeller Material | Cast Iron |
Duty | Continuous |
Drain | Yes |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 406.000000 |
Warranty (YRS.) | 1 |