My Cart

Series 700B

These rugged, positive displacement, economy pumps are UL listed and deliver flow rates up to 20GPM (76LPM). The FR700B Series pumps are compatible with the following fluids: Diesel, Gasoline, Kerosene, Mineral Spirits, Heptane, and Hexane. The FR700B pumps are NOT compatible with the following fluids: Acetone, Ammonia, Benzene, Bleach, Hydrochloric Acid, Ink and Toluene.

  • Explosion-proof UL listed 1/3HP motor (115VAC-60Hz) with sealed bearings
  • Heavy-duty switch, thermal overload protection and junction box
  • Carbon rotor vanes and ceramic/carbon seal reduce wear and repair expense
  • Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift
  • Easy removable strainer
  • Automatic bypass valve
  • 2" threaded base for tank openings
  • No foot valve required
  • UL/cUL, CSA listed

Performance

  • Maximum outlet pressure-- 20 PSI (1.52 BAR)
  • Maximum flow rate (1)-- 20 GPM (75.7 LPM)
  • Maximum recommended Viscosity of Pumped Fluid--Diesel Fuel
  • Maximum ambient operating temperature-- 150F (66C)
  • Minimum ambient operating temperature -15F (-26C)
  • Minimum Dry Vacuum-- 12 inches of mercury
  • Minimum Suction Lift-- 15 ft. for Diesel. For gasoline see below

Lift of gasoline dependent on Reid's vapor pressure of the gasoline and it's temperature. The lower the vapor pressure and temperature, the higher the possible lift.

There are no products matching the selection.
If possible try broadening your search to "All Categories" from category drop down menu. For model numbers spaces and dashes are required. Avoid using common terms like pump, centrifugal, submersible... If you are still having trouble Contact us or give us a call 800-PumpBiz.