My Cart

Dual Float Level Switch

  • Model Number:

    DFC1 Float switch

  • Product Name:
    Dual Float Level Switch
  • Manufacturer:
115v 3/4HP Basic
Model Number
DFC1 Float switch
$59.00
Glentronics PHCC DFC1 switch

PumpBiz DFC1 Float switch

Dual Float Controller DFC1 The Dual Float and Controller is included with the S2 series pumps. It turns on the pump when water lifts the float switch 1/4", and runs the pump for an additional 10 seconds after the float drops, to completely empty the sump pit once the float returns to its original position. Industrial strength electronics, 30 amp relay means extended life compared to ordinary float switch. ON level point is 3/4" from its bottom surface. This makes it ideal for floor level or sucker pumps and utility pumps working at a low level like 505000.  5"L x 2"Dia. Must be protected from weather if outdoors.

Power Rating: 3/4HP or 12 amps 115vac

Cords: 120v 10' float w/plug

The PHCC Dual Float has, not one, but two floats mounted within a protective cage.

Should one float fail to operate, the second float is available and ready to activate the pump. The protective cage prevents debris or other wires from interfering with movement of the floats. Switch is mounted independent from pump, allowing user to adjust the height of pump activation. The result - the most reliable float switch in the industry!

No alarm or remote alarm connections.

Patented 38g748

For more advanced design with alarms Also See: DualFloat Level Switch Deluxe DFC2. Sump pump switchs.

More Information
Model Number DFC1 Float switch
Wetted Materials PolyPro-GF
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 12
Max Operating Temperature (F) 100
Viscosity Water 1.00 cp 31.00 ssu
Cord Length (Ft.) 10
Country of Manufacture United States
Weight (Lbs) 2.000000
Warranty (YRS.) 1
>